Connector Adapter

Features

Specifications

• Overall Width:
  0.900 inches
• Unthreaded Mounting Hole Diameter:
  0.160 inches
• Mating End Quantity:
  2
• Connector Locking Method:
  Lock tab
• End Application:
  Automated surface observing system (asos)
• Federal Supply Class (fsc):
  Connectors, electrical
• National Stock Number (nsn):
  5935-01-399-2558
• Special Features:
  Adapter shall be a filter/surge suppressor to perform emi and surge protection on telephone signals. The filter/suppressor shall operate with normal switched telephone signal levels. It must pass the ac ring voltage of approximately 170 vac as well as audio up to 4khz. There shall be 4 pins on each filter. All 4 pins shall be filtered and protected for surge. Surge protection shall be shunted to case ground. Current rating - load current 0.5 amperes per pin; operating voltage - 200 vac; dc resistance - 0.2 ohms or less. The input end of the housing shall have a rj-11 socket telephone connector and a mounting flange. The flange shall have two 4-40 screw inserts. The output end shall have a rj-11 connector. The pins shall be wired pin to pin