Motor-Tachometer Generator
15TGSM112
(NSN) National Stock Number
6105-00-728-0252
Federal Supply Classification
6105 Electrical Motors
Item Name Code
28454
Schedule B Code
8412809000
Summary
1.437 inches overall height, 3.732 inches overall length, 1.437 inches overall width, 0.375 inches nominal single end thread length, 0.1562 inches nominal single end spline minor diameter, 15 single end spline quantity
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CX |
Identification
An item which is an electrical rotating machine combining both control motor and tachometer generator action. The control motor and tachometer generator may be contained in the same or separate housings. It is designed for servo application where instant response to input signal is essential. It is generally used in circuits where the output potential from the tachometer generator is fed back to prevent excessive oscillation and for assuring high stability in a servo loop. Excludes:dynamotor; and motor-generator.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 28454 | A271A0 | - | 1 |
Specifications
Overall Height
1.437 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
3.732 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
1.437 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Thread Length
0.375 inches nominal single end
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Spline Minor Diameter
0.1562 inches nominal single end
Details
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.Spline Quantity
15 single end
Details
The number of splines on or in the item.Shaft Diameter
0.1765 inches nominal single end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Current Type
ac input
Details
Indicates the type of current whether alternating,direct,or both.Enclosure Feature
totally inclosed
Details
An indication of the feature/s/ of the enclosure.Spline Length
0.4110 inches nominal single end
Details
A measurement of the longest dimension of a spline,in distinction from width.Mounting Method
face
Details
The means of attaching the item.Mounting Facility Type And Quantity
1 clamp collar and 4 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Excitor Type
separately excited
Details
Indicates the type of excitor provided.Calibration Speed In Rpm
1000.0
Details
The speed at which the calibration is determined,expressed in revolutions per minute.Cooling Method
nonventilated
Details
The means of cooling used to maintain the required operating temperature of the item.Calibration Voltage Output Type In Volts
3.2 ac
Details
An indication of the type of calibration voltage output,expressed in volts.Torque Rating And Type
1.45 inch-ounces stalled
Details
Indicates the torque rating,and its type.Inclosure Specification
commercial
Details
The government or industrial specification or standard that defines the inclosure feature.Control Field Voltage Type And Rating In Volts
115.0 ac
Details
Indicates the type of control field voltage and its rating,expressed in volts.Features Provided
horizontal mounting position and vertical mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Power Rating
12.200 watts output
Details
The amount of electrical energy that can be dissipated.Nominal Thread Size
0.112 inches single end
Details
A designation that is used for the purpose of general identification of the thread.Length Of Shaft From Housing
0.411 inches single end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Mounting Facility Circle Diameter
1.100 inches
Details
The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.Rotor Speed Rating In Rpm
4500.0 single no load
Details
The speed rating of a rotor,expressed in revolutions per minute.Current Rating In Amps
0.110 single input
Details
The amount of current for which an item is rated,expressed in amperes.Connection Type And Voltage Rating In Volts
115.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Shaft End Characteristic
a3 first style single end and a14 second style single end
Details
An indication of the characteristic(s) of the shaft end.Phase
single input
Details
The number of alternating current phases.Frequency In Hertz
400.0 output
Details
The cycles per second /hertz/ of the alternating current.Thread Series Designator
unf single end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Terminal Type And Quantity
10 screw
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| BT1407MA4 | 04320 | 1 | - | 5 | 2 | - | CX |
| 15G4KAC1B0 | 10112 | 1 | - | 5 | 2 | - | CX |
| 675074 | 53711 | 5 | - | 3 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS, INC. DBA TACHTRONIC INSTRUMENTS DIVISION DIV AMETEK TECHNICAL AND INDUSTRIAL PRODUCTS, INC.
CAGE: 14404
NEW ULM
, MN
, 56073-1167
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 6105-00-728-0252
What is the NIIN of the NSN 6105-00-728-0252?
The National Item Identification Number (NIIN) of the NSN 6105-00-728-0252 is 00-728-0252
When the NSN 6105-00-728-0252 was assigned to the Federal Catalog?
It was assigned 63 years ago, on Sun, Jan 1, 1961
Does the NSN 6105-00-728-0252 contain any precious metals?
Type/content is unknown
Does the NSN 6105-00-728-0252 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products