High Pass Filter
121017
(NSN) National Stock Number
5915-00-725-0010
Federal Supply Classification
5915 Filters and Networks
Item Name Code
13910
Schedule B Code
8527995030
Summary
5.500 inches minimum and 5.624 inches maximum overall length, 0.719 inches minimum and 0.781 inches maximum body outside diameter, +5.0 to 33.0 vibration resistance range in hertz, +0.0 to 60.0 deg celsius operating temp range, 10000.0 average life rating in hours, 3.0 gigahertz blank reference frequency per function
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 3 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item designed to pass all frequencies above a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13910 | A047B0 | 3 | 1 |
Specifications
Overall Length
5.500 inches minimum and 5.624 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
0.719 inches minimum and 0.781 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Vibration Resistance Range In Hertz
+5.0 to 33.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Operating Temp Range
+0.0 to 60.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Average Life Rating In Hours
10000.0
Details
The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.Reference Frequency Per Function
3.0 gigahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Input Impedance Per Function W/Load
50.0 ohms blank
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Output Impedance Per Function W/Source Across Input
50.0 ohms blank
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Input Terminal Manufacturer Code
80058
Details
The identifying numeric code of the originator that controls or manufactures the input terminal.Input Terminal Identification
ug20c/u
Details
The specification,standard,or manufacturers identification number or symbol used to identify the input terminal.Output Terminal Manufacturer Code
80058
Details
The identifying numeric code of the originator that controls or manufactures the output terminal.Output Terminal Identification
ug1185u
Details
The specification,standard,or manufacturers identification number or symbol used to identify the output terminal.Voltage Standing Wave Ratio Per Function
1.5 blank
Details
The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Insertion Loss At Reference Frequency Per Function In Decibels
1.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 connector, plug input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 connector, plug output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
200.00 megahertz blank and 2.50 gigahertz blank and 2.90 gigahertz blank and 3.10 gigahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Frequency Band Width Per Function
2.90 gigahertz blank and 3.10 gigahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
25.0 minimum blank and 1.0 maximum blank 1st function
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Style Designator
round terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 121017 | 14135 | 5 | - | 5 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 21275 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
L3HARRIS TECHNOLOGIES, INC DIV SPACE & AIRBORNE SYSTEMS
CAGE: 24930
VAN NUYS
, CA
, 91406-2027
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-725-0010
What is the NIIN of the NSN 5915-00-725-0010?
The National Item Identification Number (NIIN) of the NSN 5915-00-725-0010 is 00-725-0010
When the NSN 5915-00-725-0010 was assigned to the Federal Catalog?
It was assigned 64 years ago, on Fri, Jan 1, 1960
Does the NSN 5915-00-725-0010 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-725-0010 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products