Electronic Shielding Gasket

Features

Specifications

• Tempurature Rating:
  -55.0 degrees celsius and 160.0 degrees celsius
• Cross-sectional Thickness:
  0.030 inches
• Center Hole Diameter:
  0.875 inches
• Bolt Hole Quantity:
  4
• End Application:
  7010-01-391-0168
• Bolt Hole Diameter:
  0.156 inches
• Color:
  Blue
• Test Data Document:
  01365-97008a8061 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Federal Supply Class (fsc):
  Miscellaneous electrical and electronic components
• National Stock Number (nsn):
  5999-01-494-7707
• Special Features:
  Material consil-a compound n0.895; elastomer binder: silicone; conductive filler: silver plated aluminum particles; volume resistanc (max): .008 ohm-cm; hardness (shore a): 65 +/- 7 in accordance with astm d-2240; tensil strength(min): 200 psi in accordance with astm d-412; elongation to break (min/max)100%/300% in accordance with astm d--412; tear strength(min) : 30 ppi in accordance with astm d-624; recommended compression: 100 psi with deflection of 6% of original gasket height; emi shielding performance tested in accordance with mil-g-83528.Paragraph 4.6.12