Engine Accessory Generator

Features

Specifications

• Thread Direction:
  Right-hand
• Thread Length:
  0.719 inches
• Furnished Items:
  Overload protective device
• Second Step Diameter:
  Between 0.688 inches and 0.689 inches
• Keyway Width:
  0.125 inches
• Unthreaded Portion Length:
  1.312 inches
• Mounting Hole Thread Direction:
  Right-hand
• Mounting Style:
  Bracket mtd w/three mtg holes, top hole threaded
• Keyway Length:
  0.625 inches
• Submersibility:
  Nonsubmersible
• Shaft Rotation Direction:
  Clockwise
• Distance From End To Keyway Center:
  1.375 inches
• Thread Diameter:
  0.500 inches
• Armature Minimum Speed In Rpm At Full Current Output:
  1850
• Maximum Output Current Rating In Amps:
  40.0
• Minimum Current Cut-in Speed In Rpm:
  1600
• Grounding Method:
  Internal
• Shaft Drive End Style:
  Straight shaft end, threaded, w/keyway
• Distance Between Shaft Center And Bottom Mounting Hole Center:
  3.785 inches
• Distance Between Shaft Center And Top Mounting Hole Center:
  3.500 inches
• Angular Deviation Of First Hole From Top Center In Deg:
  193.0
• Angular Deviation Of Second Hole From First Hole In Deg:
  159.0
• Distance Between Inside Surfaces Of Hinge Bracket:
  Between 7.243 inches and 7.257 inches
• Distance Between Outside Surfaces Of Hinge Bracket:
  Between 8.368 inches and 8.382 inches
• Bottom Mounting Hole Diameter:
  0.328 inches
• Maximum Rated Armature Speed In Rpm:
  7600
• Thread Series:
  Unf
• Thread Class:
  2a
• Mounting Hole Thread Series Designator:
  Unc
• Mounting Hole Thread Diameter:
  0.312 inches
• Mounting Hole Thready Qty Per Inch (tpi):
  18
• Mounting Hole Thread Class:
  2b
• Thready Qty Per Inch (tpi):
  20
• Voltage In Volts:
  6.0
• Federal Supply Class (fsc):
  Engine electrical system components, nonaircraft
• National Stock Number (nsn):
  2920-00-640-7492