Engine Accessory Generator

Features

Specifications

• Thread Direction:
  Right-hand
• Thread Length:
  0.906 inches
• Spline Minor Diameter:
  Any acceptable
• Spline Major Diameter:
  0.874 inches
• Spline Width:
  Between 0.216 inches and 0.217 inches
• Spline Quantity:
  6
• Mounting Hole Thread Direction:
  Right-hand
• Mounting Style:
  Bracket mtd w/three mtg holes, top hole threaded
• Environmental Protection:
  Corrosion resistant
• Submersibility:
  Nonsubmersible
• Maximum Operating Altitude Rating:
  Not rated
• Shaft Rotation Direction:
  Clockwise
• Thread Diameter:
  0.625 inches
• Spline Length:
  1.938 inches
• Armature Minimum Speed In Rpm At Full Current Output:
  1500
• Maximum Output Current Rating In Amps:
  26.0
• Minimum Current Cut-in Speed In Rpm:
  880
• Grounding Method:
  Internal
• Shaft Drive End Style:
  Splined shaft end, threaded
• Cotter Pin Hole:
  Included
• Distance Between Shaft Center And Bottom Mounting Hole Center:
  3.875 inches
• Distance Between Shaft Center And Top Mounting Hole Center:
  3.500 inches
• Angular Deviation Of First Hole From Top Center In Deg:
  8.0
• Angular Deviation Of Second Hole From First Hole In Deg:
  201.0
• Distance Between Inside Surfaces Of Hinge Bracket:
  Between 7.243 inches and 7.257 inches
• Distance Between Outside Surfaces Of Hinge Bracket:
  Between 8.181 inches and 8.195 inches
• Bottom Mounting Hole Diameter:
  Between 0.328 inches and 0.453 inches
• Maximum Rated Armature Speed In Rpm:
  1800
• Thread Series:
  Unf
• Thread Class:
  2a
• Mounting Hole Thread Series Designator:
  Unc
• Mounting Hole Thread Diameter:
  0.438 inches
• Mounting Hole Thready Qty Per Inch (tpi):
  14
• Mounting Hole Thread Class:
  2b
• Thready Qty Per Inch (tpi):
  18
• Voltage In Volts:
  12.0
• Federal Supply Class (fsc):
  Engine electrical system components, nonaircraft
• National Stock Number (nsn):
  2920-00-294-3479