Engine Accessory Generator

Features

Specifications

• Thread Direction:
  Right-hand
• Thread Length:
  0.719 inches
• Second Step Diameter:
  0.668 mils and 0.669 centimeters
• Keyway Width:
  0.125 inches
• Unthreaded Portion Length:
  Between 1.281 inches and 1.344 inches
• Mounting Hole Thread Direction:
  Right-hand
• Mounting Style:
  Bracket mtd w/three mtg holes, top hole threaded
• Keyway Length:
  0.625 inches
• Submersibility:
  Nonsubmersible
• Shaft Rotation Direction:
  Clockwise
• Distance From End To Keyway Center:
  1.375 inches
• Thread Diameter:
  0.500 inches
• Armature Minimum Speed In Rpm At Full Current Output:
  1550
• Maximum Output Current Rating In Amps:
  26.0
• Grounding Method:
  External
• Shaft Drive End Style:
  Straight shaft end, threaded, w/keyway
• Cotter Pin Hole:
  Included
• Distance Between Shaft Center And Bottom Mounting Hole Center:
  3.875 inches
• Distance Between Shaft Center And Top Mounting Hole Center:
  3.500 inches
• Angular Deviation Of First Hole From Top Center In Deg:
  193.0
• Angular Deviation Of Second Hole From First Hole In Deg:
  159.0
• Distance Between Inside Surfaces Of Hinge Bracket:
  Between 7.243 inches and 7.257 inches
• Distance Between Outside Surfaces Of Hinge Bracket:
  Between 8.243 inches and 8.257 inches
• Bottom Mounting Hole Diameter:
  0.453 inches
• Thread Series:
  Unf
• Thread Class:
  2a
• Mounting Hole Thread Series Designator:
  Unc
• Mounting Hole Thread Diameter:
  0.312 inches
• Mounting Hole Thready Qty Per Inch (tpi):
  18
• Mounting Hole Thread Class:
  2b
• Thready Qty Per Inch (tpi):
  20
• Voltage In Volts:
  12.0
• Federal Supply Class (fsc):
  Engine electrical system components, nonaircraft
• National Stock Number (nsn):
  2920-00-371-5085