Engine Accessory Generator

Features

Specifications

• Thread Direction:
  Right-hand
• Thread Length:
  0.500 inches
• Furnished Items:
  Overload protective device
• Second Step Diameter:
  0.750 inches
• Keyway Width:
  0.156 inches
• Unthreaded Portion Length:
  0.750 inches
• Mounting Hole Thread Direction:
  Right-hand
• Mounting Style:
  Base flanged mtd w/ four threaded mtg holes
• Center To Center Distance Between Mounting Holes Along Width:
  3.500 inches
• Center To Center Distance Between Mounting Holes Along Length:
  3.625 inches
• Environmental Protection:
  Corrosion resistant
• Keyway Length:
  0.750 inches
• Submersibility:
  Nonsubmersible
• Shaft Rotation Direction:
  Clockwise
• Distance From End To Keyway Center:
  0.875 inches
• Thread Diameter:
  0.500 inches
• Armature Minimum Speed In Rpm At Full Current Output:
  1500
• Maximum Output Current Rating In Amps:
  5.0
• Minimum Current Cut-in Speed In Rpm:
  900
• Shaft Drive End Style:
  Straight shaft end, threaded, w/keyway
• Distance From Raised Face To First Mounting Hole Center:
  2.375 inches
• Distance From Shaft Centerline To Mounting Flange Surface:
  4.250 inches
• Maximum Rated Armature Speed In Rpm:
  3000
• Thread Series:
  Unf
• Thread Class:
  2a
• Mounting Hole Thread Series Designator:
  Unc
• Mounting Hole Thread Diameter:
  0.500 inches
• Mounting Hole Thready Qty Per Inch (tpi):
  13
• Mounting Hole Thread Class:
  2b
• Thready Qty Per Inch (tpi):
  20
• Voltage In Volts:
  30.0
• Federal Supply Class (fsc):
  Engine electrical system components, nonaircraft
• National Stock Number (nsn):
  2920-00-294-3864