Engine Accessory Generator

Features

Specifications

• Thread Direction:
  Right-hand
• Thread Length:
  0.500 inches
• Second Step Diameter:
  0.750 inches
• Keyway Width:
  0.156 inches
• Unthreaded Portion Length:
  0.750 inches
• Mounting Hole Thread Direction:
  Right-hand
• Mounting Style:
  Body mtd w/four threaded mtg holes
• Pilot Height:
  0.250 inches
• Environmental Protection:
  Corrosion resistant
• Keyway Length:
  0.750 inches
• Submersibility:
  Nonsubmersible
• Shaft Rotation Direction:
  Counterclockwise
• Distance From End To Keyway Center:
  0.875 inches
• Thread Diameter:
  0.500 inches
• Ground Polarity Type:
  Negative or positive
• Armature Minimum Speed In Rpm At Full Current Output:
  2000
• Maximum Output Current Rating In Amps:
  10.0
• Minimum Current Cut-in Speed In Rpm:
  1200
• Shaft Drive End Style:
  Straight shaft end, threaded, w/keyway
• Distance From Raised Face To First Mounting Hole Center:
  2.750 inches
• Angular Deviation Of First Hole From Top Center In Deg:
  125.0
• Angular Deviation Of Second Hole From First Hole In Deg:
  90.0
• Distance From Raised Face To Second Mounting Center:
  6.750 inches
• Maximum Rated Armature Speed In Rpm:
  3000
• Thread Series:
  Unf
• Thread Class:
  2a
• Mounting Hole Thread Series Designator:
  Unf
• Mounting Hole Thread Diameter:
  0.375 inches
• Mounting Hole Thready Qty Per Inch (tpi):
  24
• Mounting Hole Thread Class:
  2b
• Thready Qty Per Inch (tpi):
  20
• Voltage In Volts:
  24.0
• Federal Supply Class (fsc):
  Engine electrical system components, nonaircraft
• National Stock Number (nsn):
  2920-00-294-3558
• Special Features:
  Shaft drilled for cotter pin 3 threaded post type terminals, 2 ea 1/4-20 thd, 1 ea 10-24 thd