Engine Accessory Generator

Features

Specifications

• Thread Direction:
  Right-hand
• Second Step Diameter:
  Between 0.668 inches and 0.669 inches
• Keyway Width:
  0.125 inches
• Unthreaded Portion Length:
  1.120 inches
• Mounting Hole Thread Direction:
  Right-hand
• Mounting Style:
  Bracket mtd w/four mtg holes, two top holes threaded
• Keyway Length:
  0.625 inches
• Submersibility:
  Nonsubmersible
• Shaft Rotation Direction:
  Clockwise
• Thread Diameter:
  0.669 inches
• Ground Polarity Type:
  Positive
• Armature Minimum Speed In Rpm At Full Current Output:
  2460
• Minimum Current Cut-in Speed In Rpm:
  1130
• Grounding Method:
  External
• Shaft Drive End Style:
  Straight shaft end, threaded, w/keyway
• Distance Between Shaft Center And Bottom Mounting Hole Center:
  3.380 inches
• Distance Between Shaft Center And Top Mounting Hole Center:
  3.190 inches
• Angular Deviation Of First Hole From Top Center In Deg:
  17.0
• Angular Deviation Of Second Hole From First Hole In Deg:
  163.0
• Distance Between Inside Surfaces Of Hinge Bracket:
  6.694 inches
• Distance Between Outside Surfaces Of Hinge Bracket:
  Between 7.561 inches and 7.574 inches
• Bottom Mounting Hole Diameter:
  Between 0.323 inches and 0.333 inches
• Angular Deviation Of Third Hole From Second Hole In Deg:
  34.0
• Maximum Rated Armature Speed In Rpm:
  8000
• Thread Series:
  Si-m
• Mounting Hole Thread Series Designator:
  Unc
• Mounting Hole Thread Diameter:
  0.313 inches
• Mounting Hole Thready Qty Per Inch (tpi):
  18
• Voltage In Volts:
  6.0
• Federal Supply Class (fsc):
  Engine electrical system components, nonaircraft
• National Stock Number (nsn):
  2920-00-943-4668