Electronic Chopper
010-611-0006-00
(NSN) National Stock Number
5945-01-026-6103
Federal Supply Classification
5945 Relays and Solenoids
Item Name Code
19759
Schedule B Code
8538907080
Summary
7 terminal quantity, pin and solder lug/stud terminal type, terminals mounting provision, 1.516 inches nominal overall length, 0.750 inches nominal overall diameter, brass case material
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An electromechanical or electronic (includes solid state semiconductor items) device designed to convert an electrical signal into a modified square wave output signal. For items excited by an alternating current, the output signal is the same frequency as, and bears a definite phase relationship to, the excitation voltage. For those electronic items designed to operate on direct current only, the output frequency of the item is dependent upon the inherent properties of the item, or the internal or external circuit constants, or the applied driving coil voltage impressed on the input signal. For an electromechanical item whose coil is designed for direct current only, see vibrator, interrupter and vibrator, self-rectifying.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19759 | T320-K | - | 2 |
Specifications
Terminal Quantity
7
Details
The number of terminals for providing electrical connection to the item.Terminal Type
pin and solder lug/stud
Details
Indicates the type of terminals for providing electrical connection to the item. please use mrc cscf in place of this discontinued mrc.Mounting Provision
terminals
Details
The provision/s/ for mounting the item. please use mrc bhms in place of this discontinued mrc.Overall Length
1.516 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Overall Diameter
0.750 inches nominal
Details
A measurement of the longest straight line across a circular cross-sectional plane.Case Material
brass
Details
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment. please use mrc matt with isac coding in place of this discontinued mrc.Operating Temp Range
-65.0 to 100.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Mounting Facility Quantity
4
Details
The number of mounting facilities provided.Mounting Configuration
terminal mtd
Details
The pattern or arrangement that describes the mounting configuration of the item.Contact Arrangement
single pole, double throw
Details
The designation that identifies the schematic diagram of the contact configuration.Input Voltage Rating
6.3 ac volts nominal
Details
The input value/s/,or range of values,for which the item is rated.Unit Type
electromechanical
Details
Indicates the type of unit.Mounting Facility Size
0.750 in. dia by 1.516 in. lg
Details
Designates the size of the mounting facility.Mounting Method
terminal
Details
The means of attaching the item.Hermetically Sealed Feature
not provided
Details
An indication of whether or not a hermetically sealed feature is provided.Drive Voltage Relationship To Input Voltage
not rated
Details
An indication of whether the drive voltage is the same as,or different from,the input voltage.Output/Input Voltage Relationship
not rated
Details
An indication of whether the output voltage is the same as,or different from,the input voltage.Contact Voltage Rating
10.0 dc volts nominal
Details
The value,or range of values,for which the contact is rated.Contact Current Rating
2.0 milliamperes maximum
Details
The amount of current for which the contact is rated.Phase Angle In Deg
25.0
Details
The difference in phase between two alternating quantities having the same frequency,expressed in degrees.Dwell Time Rating In Deg
155.0 minimum and 185.0 maximum
Details
That portion of each driving cycle during which electrical continuity exists between the center contact and one stationary contact,expressed in degrees.Plug In Mounting Feature
not provided
Details
An indication of whether or not a feature for plug in mounting is provided.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 36A | 82227 | 3 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
SENSATA TECHNOLOGIES MARYLAND, INC
CAGE: 81541
CAMBRIDGE
, MD
, 21613-9468
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5945-01-026-6103
What is the NIIN of the NSN 5945-01-026-6103?
The National Item Identification Number (NIIN) of the NSN 5945-01-026-6103 is 01-026-6103
When the NSN 5945-01-026-6103 was assigned to the Federal Catalog?
It was assigned 48 years ago, on Sat, Aug 28, 1976
Does the NSN 5945-01-026-6103 contain any precious metals?
Type/content is unknown
Does the NSN 5945-01-026-6103 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products