Electronic Chopper
300NH
8 terminal quantity, tube plug terminal type, 1.438 inches nominal overall length, 0.763 inches nominal overall diameter, -65.0 to 100.0 deg celsius operating temp range, single pole, double throw contact arrangement
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
An electromechanical or electronic (includes solid state semiconductor items) device designed to convert an electrical signal into a modified square wave output signal. For items excited by an alternating current, the output signal is the same frequency as, and bears a definite phase relationship to, the excitation voltage. For those electronic items designed to operate on direct current only, the output frequency of the item is dependent upon the inherent properties of the item, or the internal or external circuit constants, or the applied driving coil voltage impressed on the input signal. For an electromechanical item whose coil is designed for direct current only, see vibrator, interrupter and vibrator, self-rectifying.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19759 | T320-K | - | 2 |
Details
The number of terminals for providing electrical connection to the item.Details
Indicates the type of terminals for providing electrical connection to the item. please use mrc cscf in place of this discontinued mrc.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
A measurement of the longest straight line across a circular cross-sectional plane.Details
The minimum and maximum limits of temperature at which the item is rated for operation.Details
The designation that identifies the schematic diagram of the contact configuration.Details
The input value/s/,or range of values,for which the item is rated.Details
Indicates the type of unit.Details
Indicates the type of base furnished with the item.Details
An indication of whether or not a hermetically sealed feature is provided.Details
An indication of whether the drive voltage is the same as,or different from,the input voltage.Details
An indication of whether the output voltage is the same as,or different from,the input voltage.Details
An indication of whether the item is designed to actuate /make/ a contact before or after the preceding contact deactuates /breaks/.Details
The value,or range of values,for which the contact is rated.Details
The amount of current for which the contact is rated.Details
The difference in phase between two alternating quantities having the same frequency,expressed in degrees.Details
That portion of each driving cycle during which electrical continuity exists between the center contact and one stationary contact,expressed in degrees.Details
An indication of whether or not a feature for plug in mounting is provided.Details
The size designation of the mounting base as it is commercially known and/or identified.Details
An indication of the arrangement of the terminal pattern.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 9144323 | 18876 | A | - | 3 | 2 | - | TX |
| 300-6-3V | 81541 | 5 | - | 3 | 2 | - | TX |
| 193B204-1 | 1DUQ5 | 6 | - | 5 | 2 | - | TX |
| 193B204-1 | 01526 | 6 | - | 5 | 9 | - | TX |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34430 | - | M | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
What is the NIIN of the NSN 5945-00-665-9996?
When the NSN 5945-00-665-9996 was assigned to the Federal Catalog?
Does the NSN 5945-00-665-9996 contain any precious metals?
Does the NSN 5945-00-665-9996 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.