Electronic Chopper
354-1028-000
1.118 inches nominal overall length, 1.875 inches nominal overall height, 1.090 inches nominal overall width, -55.0 to 100.0 deg celsius operating temp range, 4 mtg holes 1/8 in. dia irregularly spaced mounting configuration, single pole, double throw, open neutral contact arrangement
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
An electromechanical or electronic (includes solid state semiconductor items) device designed to convert an electrical signal into a modified square wave output signal. For items excited by an alternating current, the output signal is the same frequency as, and bears a definite phase relationship to, the excitation voltage. For those electronic items designed to operate on direct current only, the output frequency of the item is dependent upon the inherent properties of the item, or the internal or external circuit constants, or the applied driving coil voltage impressed on the input signal. For an electromechanical item whose coil is designed for direct current only, see vibrator, interrupter and vibrator, self-rectifying.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19759 | T320-K | - | 2 |
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
The distance measured in a straight line from the bottom to the top of an item.Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Details
The minimum and maximum limits of temperature at which the item is rated for operation.Details
The pattern or arrangement that describes the mounting configuration of the item.Details
The designation that identifies the schematic diagram of the contact configuration.Details
The input value/s/,or range of values,for which the item is rated.Details
Indicates the type of unit.Details
The means of attaching the item.Details
The number of complete cyclic changes,per unit of time,for which the drive is rated.Details
An indication of whether the item is designed to actuate /make/ a contact before or after the preceding contact deactuates /breaks/.Details
The value,or range of values,for which the contact is rated.Details
The amount of current for which the contact is rated.Details
The difference in phase between two alternating quantities having the same frequency,expressed in degrees.Details
That portion of each driving cycle during which electrical continuity exists between the center contact and one stationary contact,expressed in degrees.Details
An indication of whether or not a feature for plug in mounting is provided.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 302-28 | 81541 | 5 | - | 5 | 2 | - | TX |
| 14545-007 | 76854 | 5 | - | 5 | 2 | - | TX |
| NC600-7 | 76854 | 1 | - | 5 | 2 | - | TX |
| DMS 81015B | 16236 | 9 | - | 5 | 9 | - | TX |
| 354-1028-00 | 95105 | 5 | - | 5 | 2 | - | TX |
| 354-1028-000 | 95105 | 5 | - | 5 | 2 | - | TX |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
What is the NIIN of the NSN 5945-00-083-0687?
When the NSN 5945-00-083-0687 was assigned to the Federal Catalog?
Does the NSN 5945-00-083-0687 contain any precious metals?
Does the NSN 5945-00-083-0687 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.