Electronic Chopper

56223-1

56223-1
(NSN) National Stock Number
5945-00-063-9244
Federal Supply Classification
5945 Relays and Solenoids
Item Name Code
19759
Schedule B Code
8538907080
Summary

1 terminal quantity, tube plug terminal type, 2.687 inches minimum and 2.717 inches maximum overall length, 1.095 inches minimum and 1.125 inches maximum overall diameter, metal case material, -55.0 to 125.0 deg celsius operating temp range

DAC HCC DMIL RNCC
A - - 3
RNVC SADC MSDS RNAAC
2 - - TX
Identification

An electromechanical or electronic (includes solid state semiconductor items) device designed to convert an electrical signal into a modified square wave output signal. For items excited by an alternating current, the output signal is the same frequency as, and bears a definite phase relationship to, the excitation voltage. For those electronic items designed to operate on direct current only, the output frequency of the item is dependent upon the inherent properties of the item, or the internal or external circuit constants, or the applied driving coil voltage impressed on the input signal. For an electromechanical item whose coil is designed for direct current only, see vibrator, interrupter and vibrator, self-rectifying.

INC FIIG Concept Condition
19759 T320-K - 2
Specifications
Terminal Quantity
1
Details The number of terminals for providing electrical connection to the item.
Terminal Type
tube plug
Details Indicates the type of terminals for providing electrical connection to the item. please use mrc cscf in place of this discontinued mrc.
Overall Length
2.687 inches minimum and 2.717 inches maximum
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Overall Diameter
1.095 inches minimum and 1.125 inches maximum
Details A measurement of the longest straight line across a circular cross-sectional plane.
Case Material
metal
Details The element,compound,or mixture of which the case is fabricated,excluding any surface treatment. please use mrc matt with isac coding in place of this discontinued mrc.
Operating Temp Range
-55.0 to 125.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Cubic Measure
2.529 cubic inches
Details A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.
Coil Type
not isolated
Details Indicates the type of coil used.
Contact Arrangement
single pole, double throw, open neutral
Details The designation that identifies the schematic diagram of the contact configuration.
Input Voltage Rating
5.7 ac volts minimum and 14.0 ac volts maximum
Details The input value/s/,or range of values,for which the item is rated.
Unit Type
electromechanical
Details Indicates the type of unit.
Base Type
standard base
Details Indicates the type of base furnished with the item.
Hermetically Sealed Feature
provided
Details An indication of whether or not a hermetically sealed feature is provided.
Input Current Rating
9.3 milliamperes maximum
Details The amount of input current for which the item is rated.
Drive Voltage Relationship To Input Voltage
equal
Details An indication of whether the drive voltage is the same as,or different from,the input voltage.
Drive Current Relationship To Input Current
equal
Details An indication of whether the drive current is the same as,or diffrent from,the input current.
Drive Frequency Rating
50.0 hertz minimum and 5.0 kilohertz maximum
Details The number of complete cyclic changes,per unit of time,for which the drive is rated.
Output/Input Voltage Relationship
equal
Details An indication of whether the output voltage is the same as,or different from,the input voltage.
Contact Operation Sequence
makes before breaks
Details An indication of whether the item is designed to actuate /make/ a contact before or after the preceding contact deactuates /breaks/.
Contact Voltage Rating
30.0 dc volts nominal
Details The value,or range of values,for which the contact is rated.
Contact Current Rating
3.0 milliamperes nominal
Details The amount of current for which the contact is rated.
Phase Angle In Deg
0.0
Details The difference in phase between two alternating quantities having the same frequency,expressed in degrees.
Dwell Time Rating In Deg
165.0 nominal
Details That portion of each driving cycle during which electrical continuity exists between the center contact and one stationary contact,expressed in degrees.
Plug In Mounting Feature
provided
Details An indication of whether or not a feature for plug in mounting is provided.
Base Mounting Size Designation
std 8 pin tube socket
Details The size designation of the mounting base as it is commercially known and/or identified.
Terminal Pattern Arrangement
pin location to match standard 8 pin octal tube socket
Details An indication of the arrangement of the terminal pattern.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
56233-1 11911 5 - 5 9 - TX
6022-15 11911 5 - 5 9 - TX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N A - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
34580 - W -
RVC WCC TCC SHC
- 72D Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
L3HARRIS TECHNOLOGIES, INC. DIV SPACE AND AIRBORNE SYSTEMS
CAGE: 82340
AMITYVILLE , NY , 11701-1130
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5945-00-063-9244
What is the NIIN of the NSN 5945-00-063-9244?
The National Item Identification Number (NIIN) of the NSN 5945-00-063-9244 is 00-063-9244
When the NSN 5945-00-063-9244 was assigned to the Federal Catalog?
It was assigned 57 years ago, on Thu, Jun 22, 1967
Does the NSN 5945-00-063-9244 contain any precious metals?
Does not contain precious metal
Does the NSN 5945-00-063-9244 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA