Electronic Chopper
SS14163KA
(NSN) National Stock Number
5945-00-729-1221
Federal Supply Classification
5945 Relays and Solenoids
Item Name Code
19759
Schedule B Code
8538907080
Summary
3 terminal quantity, pin terminal type, 2.344 inches minimum and 4.625 inches maximum overall diameter, metal case material, +0.0 to 43.0 deg celsius operating temp range, not isolated coil type
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
An electromechanical or electronic (includes solid state semiconductor items) device designed to convert an electrical signal into a modified square wave output signal. For items excited by an alternating current, the output signal is the same frequency as, and bears a definite phase relationship to, the excitation voltage. For those electronic items designed to operate on direct current only, the output frequency of the item is dependent upon the inherent properties of the item, or the internal or external circuit constants, or the applied driving coil voltage impressed on the input signal. For an electromechanical item whose coil is designed for direct current only, see vibrator, interrupter and vibrator, self-rectifying.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19759 | T320-K | - | 2 |
Specifications
Terminal Quantity
3
Details
The number of terminals for providing electrical connection to the item.Terminal Type
pin
Details
Indicates the type of terminals for providing electrical connection to the item. please use mrc cscf in place of this discontinued mrc.Overall Diameter
2.344 inches minimum and 4.625 inches maximum
Details
A measurement of the longest straight line across a circular cross-sectional plane.Case Material
metal
Details
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment. please use mrc matt with isac coding in place of this discontinued mrc.Operating Temp Range
+0.0 to 43.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Coil Type
not isolated
Details
Indicates the type of coil used.Contact Arrangement
any acceptable
Details
The designation that identifies the schematic diagram of the contact configuration.Input Voltage Rating
6.3 ac volts nominal
Details
The input value/s/,or range of values,for which the item is rated.Unit Type
electromechanical
Details
Indicates the type of unit.Base Type
standard base
Details
Indicates the type of base furnished with the item.Hermetically Sealed Feature
not provided
Details
An indication of whether or not a hermetically sealed feature is provided.Input Current Rating
0.060 amperes nominal
Details
The amount of input current for which the item is rated.Drive Voltage Relationship To Input Voltage
equal
Details
An indication of whether the drive voltage is the same as,or different from,the input voltage.Drive Current Relationship To Input Current
unequal
Details
An indication of whether the drive current is the same as,or diffrent from,the input current.Drive Frequency Rating
50.0 hertz minimum and 60.0 hertz maximum
Details
The number of complete cyclic changes,per unit of time,for which the drive is rated.Output/Input Voltage Relationship
unequal
Details
An indication of whether the output voltage is the same as,or different from,the input voltage.Contact Operation Sequence
makes before breaks
Details
An indication of whether the item is designed to actuate /make/ a contact before or after the preceding contact deactuates /breaks/.Contact Voltage Rating
6.0 ac volts nominal
Details
The value,or range of values,for which the contact is rated.Contact Current Rating
1.0 milliamperes nominal
Details
The amount of current for which the contact is rated.Phase Angle In Deg
22.0
Details
The difference in phase between two alternating quantities having the same frequency,expressed in degrees.Dwell Time Rating In Deg
190.0 minimum and 206.0 maximum
Details
That portion of each driving cycle during which electrical continuity exists between the center contact and one stationary contact,expressed in degrees.Plug In Mounting Feature
provided
Details
An indication of whether or not a feature for plug in mounting is provided.Base Mounting Size Designation
6 pin medium tube
Details
The size designation of the mounting base as it is commercially known and/or identified.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| C1292 | 12749 | X | - | 5 | 9 | - | XX |
| CH394 | 80640 | 6 | - | 3 | 2 | - | 37 |
| 238824 | 1PQF4 | 5 | - | 5 | 2 | - | ZZ |
| 238824 | 36378 | X | - | 5 | 9 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| - | - | - | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | - | - | - |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
HONEYWELL INC PROCESS CONTROL DIV
CAGE: 08987
FORT WASHINGTON
, PA
, 19034-3264
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5945-00-729-1221
What is the NIIN of the NSN 5945-00-729-1221?
The National Item Identification Number (NIIN) of the NSN 5945-00-729-1221 is 00-729-1221
When the NSN 5945-00-729-1221 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5945-00-729-1221 contain any precious metals?
Type/content is unknown
Does the NSN 5945-00-729-1221 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products