Nonprecision Nonwire Wound Variable Resistor

Features

Specifications

• Section Quantity:
  1
• Body Style:
  Rectangular w/mounting holes/slots
• Reliability Indicator:
  Not established
• Terminal Length:
  Between 0.469 inches and 0.531 inches
• Mounting Hole Diameter:
  0.093 inches
• Shaft Diameter:
  Between 0.100 inches and 0.130 inches
• Shaft Length:
  Between 0.036 inches and 0.080 inches
• Body Length:
  Between 1.218 inches and 1.282 inches
• Body Width:
  Between 0.300 inches and 0.330 inches
• Body Height:
  Between 0.180 inches and 0.200 inches
• Shaft Style:
  Round, slotted
• Actuator Type:
  Single shaft
• Effective Electrical Rotation In Deg Angular Rotation:
  Between 6120.0 and 9720.0
• Maximum Starting Torque:
  8.00 inch-ounces
• Maximum Running Torque:
  8.00 inch-ounces
• Center To Center Distance Between Terminals:
  Between 0.690 inches and 0.710 inches
• Fragility Factor:
  Moderately rugged
• Lateral Distance Between Mounting Hole Centers:
  1.000 inches
• Mounting Facility Quantity:
  2
• Terminal Location:
  Lower adjacent side two rows
• Mounting Method:
  Unthreaded hole
• Features Provided:
  Humidity proof
• Cubic Measure:
  0.075 cubic inches
• Electrical Resistance Per Section:
  500.0 ohms single section
• Rotary Actuator Travel In Angular Deg:
  Between 6120.0 and 9720.0
• Center To Center Distance Between Center Terminal And Outside Terminal:
  Between 0.300 inches and 0.400 inches
• Resistance Tempurature Characteristic Range Per Section In Percent:
  +0.0/+4.5 -55 degrees celsius single section and +0.0/+2.5 -25 degrees celsius single section and -1.5/+1.5 85 degrees celsius single section and -4.0/+4.0 125 degrees celsius single section
• Resistance Tempurature Characteristic Range Per Section In Percent:
  +0.0 to 4.5 -55 degrees celsius single section and +0.0 to 2.5 -25 degrees celsius single section and -1.5 to 1.5 85 degrees celsius single section and -4.0 to 4.0 125 degrees celsius single section
• Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
  150.0 single section
• Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
  -250.0/+250.0 single section
• Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
  -250.0 to 250.0 single section
• Power Dissipation Rating Per Section In Watts:
  0.75 free air single section
• Resistance Tolerance Per Section In Percent:
  -10.0/+10.0 single section
• Resistance Tolerance Per Section In Percent:
  -10.0 to 10.0 single section
• Actuator Travel Control Feature:
  Clutch
• Criticality Code Justification:
  Feat
• Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
  85.0 single section
• Standard Taper Curve Per Section:
  A single section
• Test Data Document:
  81349-mil-r-22097 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  3 pin
• Specification Data:
  81349-mil-r-22097/2 government specification
• Federal Supply Class (fsc):
  Resistors
• National Stock Number (nsn):
  5905-00-517-9330
• Special Features:
  Aircraft, f-111