-
Section Quantity:
1
-
Body Style:
Cylindrical servo mounted
-
Pilot Diameter:
1.87450 inches
-
Pilot Length:
0.06200 inches
-
Undercut Diameter:
1.87500 inches
-
Undercut Width:
0.07300 inches
-
Body Diameter:
1.437 inches
-
Shaft Diameter:
Between 0.2494 inches and 0.2497 inches
-
Shaft Length:
0.562 inches
-
Body Length:
1.020 inches
-
Overall Diameter:
2.005 inches
-
Mounting Lip Diameter:
1.99750 inches
-
Mounting Lip Depth:
0.06200 inches
-
Shaft Style:
Round
-
Actuator Type:
Single shaft
-
Effective Electrical Rotation In Deg Angular Rotation:
357.0
-
Maximum Starting Torque:
2.00 inch-ounces
-
Shaft Runout:
0.001 inches
-
Lateral Runout:
0.002 inches
-
Pilot Diameter Runout:
0.00100 inches
-
Shaft Radial Play:
0.003 inches
-
Terminal Location:
Radially positioned over less than half the circumference
-
Mounting Method:
Clamp ring
-
Electrical Resistance Per Section:
10.000 kilohms single section
-
Rotary Actuator Travel In Angular Deg:
360.0
-
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
125.0 single section
-
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-400.0/+400.0 single section
-
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-400.0 to 400.0 single section
-
Power Dissipation Rating Per Section In Watts:
1.5 free air single section
-
Function Conformity Per Section:
Single section independent linearity
-
Fixed Tap Quantity Per Section:
1 single section
-
Tap Location Tolerance Per Section:
-0.5/+0.5 ohms single section
-
Tap Location Tolerance Per Section:
-0.5 to 0.5 ohms single section
-
Resistance Tolerance Per Section In Percent:
-10.0/+10.0 single section
-
Actuator Travel Control Feature:
Continuous motion
-
Tap Location From Ccw Terminal Per Section In Ohms:
5000.0 single section
-
Function Characteristic Per Section:
Single section linear
-
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
80.0 single section
-
Test Data Document:
18876-10179966 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
-
Federal Supply Class (fsc):
Resistors
-
National Stock Number (nsn):
5905-00-177-7342