-
Section Quantity:
1
-
Body Style:
Rectangular w/bushing
-
Reliability Indicator:
Not established
-
Shaft Diameter:
Between 0.124 inches and 0.126 inches
-
Shaft Length:
0.625 inches
-
Mounting Bushing Length:
0.250 inches
-
Body Length:
0.469 inches
-
Body Width:
0.500 inches
-
Body Height:
0.485 inches
-
Shaft Style:
Round
-
Switch Type:
Rotary
-
Switch Voltage Rating In Volts:
125.0 and 28.0
-
Actuator Type:
Single shaft
-
Effective Electrical Rotation In Deg Angular Rotation:
248.0
-
Maximum Starting Torque:
3.00 inch-ounces
-
Maximum Running Torque:
3.00 inch-ounces
-
Maximum Stop Torque:
64.00 inch-ounces
-
Nonturn Device Location:
At 10 oclock
-
Nonturn Device Radius:
0.245 inches
-
Switch Operating Position:
Start of rotation
-
Switch Contact Arrangement:
Single pole, single throw, normally open, both positions maintained
-
Screw Thread Diameter:
0.375 inches
-
Screw Thread Series Designator:
Unef
-
Screw Thready Qty Per Inch (tpi):
32.0
-
Terminal Location:
Rear-bottom
-
Mounting Method:
Standard bushing
-
Features Provided:
Switch
-
Electrical Resistance Per Section:
100.000 kilohms single section
-
Rotary Actuator Travel In Angular Deg:
295.0
-
Resistance Tempurature Characteristic Range Per Section In Percent:
+0.0/+8.0 -55 degrees celsius single section and +0.0/+4.0 -25 degrees celsius single section and +0.0/+2.0 0 degrees celsius single section and -3.0/+3.0 85 degrees celsius single section and +0.0/+6.0 120 degrees celsius single section
-
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
120.0 single section
-
Power Dissipation Rating Per Section In Watts:
0.5 free air single section
-
Resistance Tolerance Per Section In Percent:
-10.0/+10.0 single section
-
Actuator Travel Control Feature:
Stops
-
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
70.0 single section
-
Switch Current Type And Rating In Amps:
0.500 ac and 1.500 dc
-
Standard Taper Curve Per Section:
A single section
-
Test Data Document:
05869-713175 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
-
Terminal Type And Quantity:
5 tab, solder lug
-
Federal Supply Class (fsc):
Resistors
-
National Stock Number (nsn):
5905-01-162-3455