Nonprecision Nonwire Wound Variable Resistor

Features

Specifications

• Section Quantity:
  1
• Body Style:
  Cylindrical bushing mounted
• Reliability Indicator:
  Not established
• Body Diameter:
  0.500 inches
• Shaft Diameter:
  0.125 inches
• Shaft Length:
  0.875 inches
• Mounting Bushing Length:
  0.500 inches
• Body Length:
  0.531 inches
• Overall Diameter:
  0.500 inches
• Shaft Style:
  Round, slotted
• Actuator Type:
  Single shaft
• Maximum Starting Torque:
  6.00 inch-ounces
• Maximum Running Torque:
  6.00 inch-ounces
• Nonturn Device Radius:
  Between 0.240 inches and 0.250 inches
• Screw Thread Diameter:
  0.250 inches
• Screw Thread Series Designator:
  Unef
• Screw Thready Qty Per Inch (tpi):
  32.0
• Terminal Location:
  Rear end
• Mounting Method:
  Locking bushing
• Features Provided:
  Panel seal
• Electrical Resistance Per Section:
  1.0 kilohms single section
• Rotary Actuator Travel In Angular Deg:
  Between 292.0 and 298.0
• Resistance Tempurature Characteristic Range Per Section In Percent:
  -3.0/+0.0 -55 degrees celsius single section and -5.0/+10.0 -25 degrees celsius single section and -5.0/+10.0 25 degrees celsius single section and -0.0/+3.0 120 degrees celsius single section
• Resistance Tempurature Characteristic Range Per Section In Percent:
  -3.0 to 0.0 -55 degrees celsius single section and -5.0 to 10.0 -25 degrees celsius single section and -5.0 to 10.0 25 degrees celsius single section and -0.0 to 3.0 120 degrees celsius single section
• Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
  120.0 single section
• Power Dissipation Rating Per Section In Watts:
  0.5 free air single section
• Resistance Tolerance Per Section In Percent:
  -10.0/+10.0 single section
• Resistance Tolerance Per Section In Percent:
  -10.0 to 10.0 single section
• Actuator Travel Control Feature:
  Stops
• Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
  70.0 single section
• Standard Taper Curve Per Section:
  A single section
• Test Data Document:
  81349-mil-r-94 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  3 tab, solder lug
• Specification Data:
  81349-mil-r-94/3 government specification
• Federal Supply Class (fsc):
  Resistors
• National Stock Number (nsn):
  5905-00-486-6763