Sensitive Switch

Features

Specifications

• Body Style:
  Hole mounted
• Hazardous Locations/environmental Protection:
  Watertight
• Center To Center Distance Between Mounting Facilities Parallel To Length:
  19.4 millimeters
• Body Length:
  33.0 millimeters
• Body Width:
  10.3 millimeters
• Body Height:
  33.0 millimeters
• Unthreaded Mounting Hole Diameter:
  3.1 millimeters
• Center To Center Distance Between Mounting Facilities Parallel To Height:
  10.3 millimeters
• Switch Actuator Quantity:
  1
• Actuator Style:
  Round, flush
• Actuator Diameter:
  2.5 millimeters
• Actuator Height:
  2.8 millimeters
• Maximum Voltage Rating In Volts:
  250.0 dc
• Inclosure Type:
  Hermetically sealed
• Mounting Method:
  Panel
• Nonpile-up Contact Arrangement:
  1 pole, double throw, one position momentary single switch unit
• Switch Release Force:
  30.0 grams
• Switch Actuating Force:
  200.0 grams
• Part Name Assigned By Controlling Agency:
  Sealed snap action switch d2vw
• Actuator Movement:
  1.0 overtravel millimeters
• Contact Load Current Rating At Maximum Rated Voltage:
  0.4 amperes resistive dc
• Terminal Type And Quantity:
  3 quick disconnect, male
• Federal Supply Class (fsc):
  Switches
• National Stock Number (nsn):
  5930-01-596-2813
• Special Features:
  Operating speed is 0.1mm to 1 mls; operating frequency is 300 operations a minute (mechanical) and 30 operations per minute (electrical); ambient operating tem is -40 to 85 degrees celcius with no icing; ambient operating humidity is 95% max (for 5 degrees c to 35 degrees celcius); terminals use awg20 4l approved lead wires; three terminals are soldered on right side of switch; 1st terminal is 2.5mm from top; second terminal lead is 5.3mm below 1st terminal lead; third terminal lead is 5.2m below second terminal lead; length to include terminal wires is 4.4mm