Control Transformer Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.8118 inches and 0.8123 inches
• Pilot Diameter:
  Between 0.4995 inches and 0.5000 inches
• Flange Diameter:
  Between 0.9360 inches and 0.9370 inches
• Flange Thickness:
  0.0630 inches
• Undercut Diameter:
  0.8400 inches
• Undercut Width:
  0.0620 inches
• Shaft Diameter:
  0.0940 inches single shaft
• Shaft Length:
  0.2300 inches single shaft
• Fragility Factor:
  Moderately rugged
• Body Size:
  10
• Stator Input Voltage Rating In Volts:
  11.8
• Stator Input Current Rating:
  21.0 milliamperes
• Stator Input Electrical Power Rating:
  50.0 milliwatts
• Frequency In Hertz:
  400.0
• Zro Resistance In Ohms:
  800.00
• Zso Resistance In Ohms:
  115.00
• Zrs Resistance In Ohms:
  890.00
• Rotor Dc Resistance In Ohms:
  560.00
• Stator Dc Resistance In Ohms:
  560.00
• Phase Shift Angle In Deg:
  9.000 input to output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  0.03
• Electrical Error Angular Range In Minutes:
  -12.0/+12.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  9.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  3.0 centimeter-grams
• Alignment Hole Quantity:
  3
• Pilot Length:
  0.0380 inches
• Shoulder Length:
  0.0620 inches
• Gear Outside Diameter:
  Between 1.7073 inches and 1.7083 inches
• Gear Thickness:
  0.1250 inches
• Mounting Surface To Terminal End Distance:
  1.2810 inches
• Shaft Hole Diameter:
  0.0600 inches single shaft
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  2900.00
• Plus J Zso Reactance In Ohms:
  470.00
• Shaft Tapered End Minor Diameter:
  0.0775 inches single shaft
• Plus J Zrs Reactance In Ohms:
  350.00
• Shaft Type:
  Round, tapered, hollowed single shaft
• Alignment Hole Depth:
  0.0500 inches
• Transformation Ratio:
  2.302 rotor to stator
• Shaft Taper Angle In Deg:
  3.0 single shaft
• Alignment Hole Bolt Circle Diameter:
  0.6780 inches
• Shaft Taper Length:
  0.1250 inches single shaft
• Terminal Type And Quantity:
  6 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-782-0112