Control Transformer Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round c
• Shoulder Diameter:
  0.9750 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  Between 1.0590 inches and 1.0620 inches
• Flange Thickness:
  0.0930 inches
• Undercut Diameter:
  Between 0.9995 inches and 1.0000 inches
• Undercut Width:
  0.0500 inches
• Shaft Diameter:
  0.1870 inches single shaft and 0.1873 inches single shaft
• Shaft Length:
  0.5550 inches single shaft
• Maximum Tempurature Rise:
  15.0 degrees celsius
• Body Size:
  11
• Stator Input Voltage Rating In Volts:
  90.0
• Stator Input Current Rating:
  37.0 milliamperes
• Stator Input Electrical Power Rating:
  900.0 milliwatts
• Frequency In Hertz:
  400.0
• Phase Shift Angle In Deg:
  6.200 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  75.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  45.00
• Electrical Error Angular Range In Minutes:
  -7.0/+7.0
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.05 inch-ounces
• Alignment Hole Quantity:
  4
• Pilot Length:
  0.0620 inches
• Shoulder Length:
  0.0620 inches
• Mounting Surface To Terminal End Distance:
  1.7940 inches
• Terminal Location:
  Rear
• Shaft Type:
  Round single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.783 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  0.8120 inches
• Terminal Type And Quantity:
  5 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-824-3207