Control Transformer Synchro

10CT1151

(NSN) National Stock Number

5990-00-295-7068

Federal Supply Classification

5990 Synchros and Resolvers

Item Name Code

15289

Schedule B Code

9014900000

Summary

Steel, stainless body material, standard round b body style, 0.8118 inches minimum and 0.8123 inches maximum shoulder diameter, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.6540 inches nominal overall length, 0.9360 inches minimum and 0.9370 inches maximum flange diameter

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	TX

Identification

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.

INC	FIIG	Concept	Condition
15289	A07800	1	1

Specifications

Body Material

steel, stainless

Details

The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.

Body Style

standard round b

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

Shoulder Diameter

0.8118 inches minimum and 0.8123 inches maximum

Details

The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.

Pilot Diameter

0.4995 inches minimum and 0.5000 inches maximum

Details

The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.

Overall Length

1.6540 inches nominal

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Flange Diameter

0.9360 inches minimum and 0.9370 inches maximum

Details

The length of a straight line which passes through the center of a flange,and terminates at the circumference.

Flange Thickness

0.0620 inches nominal

Details

A measurement of the smallest dimension of a flange,in distinction from length or width.

Undercut Width

0.0620 inches nominal

Details

None.

Shaft Diameter

0.0895 inches minimum single shaft and 0.0900 inches maximum single shaft

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Shaft Length

0.4130 inches nominal single shaft

Details

A measurement of the longest dimension of the shaft,in distinction from width.

Fragility Factor

moderately rugged

Details

The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.

Body Size

Details

An alpha and/or numeric designation indicating the size by which the body is identified.

Stator Input Voltage Rating In Volts

11.8 nominal

Details

The value of the primary excitation voltage for which the stator is rated,expressed in volts.

Stator Input Current Rating

9.0 milliamperes nominal

Details

The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.

Stator Input Electrical Power Rating

12.0 watts maximum

Details

The value of the primary /electrical/ excitation power for which the stator is rated.

Frequency In Hertz

400.0 nominal

Details

The cycles per second /hertz/ of the alternating current.

Zro Resistance In Ohms

920.00 nominal

Details

The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.

Zso Resistance In Ohms

220.00 nominal

Details

The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.

Zrs Resistance In Ohms

1090.00 nominal

Details

The resistance /r/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.

Phase Shift Angle In Deg

15.500 input to output nominal

Details

The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.

Maximum Total Null Voltage Output In Millivolts Per Volt

0.05

Details

The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.

Electrical Error Angular Range In Minutes

-15.0 to 15.0

Details

The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.

Actuator Friction Torque At Minus 55 Deg Celsius

15.0 centimeter-grams nominal

Details

The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.

Actuator Friction Torque At Plus 25 Deg Celsius

3.0 centimeter-grams nominal

Details

The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.

Alignment Hole Quantity

Details

The number of holes provided for aligning the item.

Pilot Length

0.0380 inches nominal

Details

A measurement of the longest dimension of a pilot,in distinction from width.

Shoulder Length

0.0620 inches nominal

Details

None.

Mounting Surface To Terminal End Distance

1.1790 inches nominal

Details

None.

Terminal Location

rear

Details

Indicates the location of the terminal/s/ on the item.

Plus J Zro Reactance In Ohms

2100.00 nominal

Details

The reactance (x) part of the rotor impedance with the stator open (zro).

Shaft Slot Depth

0.0310 inches nominal single shaft

Details

None.

Plus J Zso Reactance In Ohms

445.00 nominal

Details

The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.

Shaft Slot Width

0.0270 inches nominal single shaft

Details

None.

Plus J Zrs Reactance In Ohms

445.00 nominal

Details

The reactance /x/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.

Shaft Type

round, slotted single shaft

Details

Indicates the type of shaft included on the item.

Alignment Hole Depth

0.0630 inches nominal

Details

None.

Transformation Ratio

1.850 rotor to stator nominal

Details

The ratio of the output voltage to the input voltage at maximum coupling.

Alignment Hole Bolt Circle Diameter

0.6780 inches nominal

Details

None.

Terminal Type And Quantity

5 wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
10CT-0155-B	51761	5	-	5	2	-	ZZ
728961-2	96774	5	-	C	1	-	ZZ
D728961-2	06840	5	-	5	9	-	TX
728961-2	55972	5	-	5	9	-	TX
AY503-5A1	55973	5	-	5	9	-	TX
718504-2	56232	5	-	3	2	-	TX
AY503-5AL	56232	X	-	5	2	-	XX
10CT295-7068	2X130	5	-	5	9	-	ZZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34580	-	W	-

RVC	WCC	TCC	SHC
-	72D	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

AMETEK TECHNICAL & INDUSTRIAL PRODUCTS, INC. DBA TACHTRONIC INSTRUMENTS DIVISION DIV AMETEK TECHNICAL AND INDUSTRIAL PRODUCTS, INC.

CAGE: 14404

NEW ULM , MN , 56073-1167

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5990-00-295-7068

What is the NIIN of the NSN 5990-00-295-7068?

The National Item Identification Number (NIIN) of the NSN 5990-00-295-7068 is 00-295-7068

When the NSN 5990-00-295-7068 was assigned to the Federal Catalog?

It was assigned 61 years ago, on Tue, Jan 1, 1963

Does the NSN 5990-00-295-7068 contain any precious metals?

Type/content is unknown

Does the NSN 5990-00-295-7068 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.