Control Transformer Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.4995 inches and 0.5000 inches
• Flange Diameter:
  Between 1.0610 inches and 1.0620 inches
• Flange Thickness:
  Between 0.0880 inches and 0.0980 inches
• Undercut Diameter:
  Between 0.9995 inches and 1.0000 inches
• Undercut Width:
  Between 0.0450 inches and 0.0550 inches
• Shaft Diameter:
  0.1195 inches single shaft and 0.1200 inches single shaft
• Shaft Length:
  0.3590 inches single shaft and 0.3910 inches single shaft
• Schematic Diagram Designator:
  1 y-rotor, 1 stator
• Body Size:
  11
• Stator Input Voltage Rating In Volts:
  11.8
• Stator Input Current Rating:
  18.2 milliamperes
• Stator Input Electrical Power Rating:
  30.0 milliwatts
• Frequency In Hertz:
  400.0
• Zro Resistance In Ohms:
  650.00
• Zso Resistance In Ohms:
  90.00
• Zrs Resistance In Ohms:
  605.00
• Rotor Dc Resistance In Ohms:
  365.00
• Stator Dc Resistance In Ohms:
  59.00
• Phase Shift Angle In Deg:
  4.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  30.00 output
• Electrical Error Angular Range In Minutes:
  -5.0/+5.0
• Actuator Friction Torque At Plus 25 Deg Celsius:
  3.0 centimeter-grams
• Alignment Hole Quantity:
  4
• Shaft Maximum Radial Play:
  0.0005 inches
• Shaft End Play:
  Between 0.0002 inches and 0.0005 inches
• Pilot Length:
  0.0590 mils and 0.0650 centimeters
• Shoulder Length:
  0.0590 mils and 0.0650 centimeters
• Mounting Surface To Terminal End Distance:
  1.8350 inches
• Shaft Maximum Runout:
  0.0010 inches
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  3000.00
• Shaft Slot Depth:
  0.0220 inches single shaft and 0.0320 inches single shaft
• Plus J Zso Reactance In Ohms:
  550.00
• Shaft Slot Width:
  0.0220 inches single shaft and 0.0320 inches single shaft
• Plus J Zrs Reactance In Ohms:
  295.00
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Depth:
  0.0700 inches
• Alignment Hole Bolt Circle Diameter:
  Between 0.8090 inches and 0.8150 inches
• Shaft Radial Play Determining Weight:
  4.0 ounces
• Shaft End Play Determining Weight:
  8.0 ounces
• Terminal Type And Quantity:
  5 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-801-2432