Control Transformer Synchro

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round b
• Shoulder Diameter:
  Between 1.3070 inches and 1.3170 inches
• Pilot Diameter:
  Between 0.8700 inches and 0.8800 inches
• Flange Diameter:
  Between 1.4340 inches and 1.4400 inches
• Flange Thickness:
  Between 0.0900 inches and 0.0960 inches
• Undercut Width:
  Between 0.0730 inches and 0.0830 inches
• Shaft Diameter:
  0.2495 inches single shaft and 0.2505 inches single shaft
• Shaft Length:
  0.5300 inches single shaft and 0.5500 inches single shaft
• Fragility Factor:
  Moderately rugged
• Body Size:
  15
• Stator Input Voltage Rating In Volts:
  90.0
• Stator Input Current Rating:
  24.0 milliamperes
• Stator Input Electrical Power Rating:
  600.0 milliwatts
• Frequency In Hertz:
  400.0
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  40.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  60.00
• Electrical Error Angular Range In Minutes:
  -6.0/+6.0
• Spline Tooth Quantity:
  21 single shaft
• Actuator Friction Torque At Minus 55 Deg Celsius:
  0.05 inch-ounces
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.01 inch-ounces
• Alignment Hole Quantity:
  4
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0020 inches
• Shaft End Play:
  0.0040 inches
• Pilot Length:
  Between 0.0370 inches and 0.0430 inches
• Shoulder Length:
  Between 0.1290 inches and 0.1350 inches
• Mounting Surface To Terminal End Distance:
  3.1910 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3590 inches single shaft and 0.3910 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.735 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  Between 1.0970 inches and 1.1030 inches
• Shaft Thread Size:
  0.190 inches single shaft
• Shaft Radial Play Determining Weight:
  4.0 ounces
• Shaft End Play Determining Weight:
  16.0 ounces
• Terminal Type And Quantity:
  4 tab w/screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-738-1928
• Special Features:
  With gear