Control Transformer Synchro

Features

Specifications

• Body Material:
  Any acceptable
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 1.3115 inches and 1.3120 inches
• Pilot Diameter:
  Between 0.8745 inches and 0.8750 inches
• Flange Diameter:
  Between 1.4340 inches and 1.4370 inches
• Flange Thickness:
  Between 0.0900 inches and 0.0960 inches
• Undercut Diameter:
  Between 1.3090 inches and 1.3150 inches
• Undercut Width:
  Between 0.0750 inches and 0.0810 inches
• Shaft Diameter:
  0.1830 inches single shaft and 0.1850 inches single shaft
• Shaft Length:
  0.5300 inches single shaft and 0.5500 inches single shaft
• Securing Hole Quantity:
  4
• Body Size:
  15
• Stator Input Voltage Rating In Volts:
  90.0
• Stator Input Current Rating:
  24.0 milliamperes
• Stator Input Electrical Power Rating:
  600.0 milliwatts
• Frequency In Hertz:
  400.0
• Zso Impedance Magnitude In Ohms:
  7800.00
• Zso Impedance Angle In Deg:
  79.67
• Rotor Dc Resistance In Ohms:
  573.00
• Stator Dc Resistance In Ohms:
  930.00
• Phase Shift Angle In Deg:
  5.140 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  40.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  60.00
• Electrical Error Angular Range In Minutes:
  -3.0/+3.0
• Spline Tooth Quantity:
  21 single shaft
• Torque Gradient Per Angular Deg:
  0.030 inch-ounces
• Alignment Hole Quantity:
  4
• Pilot Length:
  Between 0.0370 inches and 0.0430 inches
• Shoulder Length:
  Between 0.1290 inches and 0.1350 inches
• Mounting Surface To Terminal End Distance:
  1.7720 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a
• Mounting Facility Screw Thread Series Designator:
  Unc
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2000 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Alignment Hole Depth:
  0.1250 inches
• Mounting Facility Screw Thread Diameter:
  0.884 inches
• Transformation Ratio:
  0.720 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  1.0970 inches
• Shaft Thread Size:
  0.186 inches single shaft
• Terminal Type And Quantity:
  5 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-912-8850