Control Transformer Synchro

Features

Specifications

• Body Material:
  Aluminum or steel, corrosion resisting
• Body Style:
  Standard round a
• Pilot Diameter:
  0.5000 inches
• Flange Diameter:
  0.7500 inches
• Flange Thickness:
  0.0620 inches
• Undercut Diameter:
  0.6870 inches
• Undercut Width:
  0.0620 inches
• Shaft Diameter:
  0.1247 inches single shaft
• Shaft Length:
  0.4810 inches single shaft
• Fragility Factor:
  Moderately rugged
• Maximum Tempurature Rise:
  10.0 degrees celsius
• Body Size:
  8
• Stator Input Voltage Rating In Volts:
  11.8
• Stator Input Current Rating:
  23.0 milliamperes
• Stator Input Electrical Power Rating:
  44.0 milliwatts
• Frequency In Hertz:
  400.0
• Zso Impedance Magnitude In Ohms:
  Between 444.00 and 570.00
• Zso Impedance Angle In Deg:
  Between 76.00 and 81.00
• Zrs Impedance Magnitude In Ohms:
  Between 830.00 and 940.00
• Zrs Impedance Angle In Deg:
  Between 16.00 and 20.00
• Phase Shift Angle In Deg:
  8.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  25.00 input
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  30.00
• Electrical Error Angular Range In Minutes:
  -7.0/+7.0
• Spline Tooth Quantity:
  13 single shaft
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.04 inch-ounces
• Shaft Maximum Radial Play:
  0.0004 inches
• Shaft End Play:
  0.0007 inches
• Pilot Length:
  0.0400 inches
• Mounting Surface To Terminal End Distance:
  1.2400 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.1900 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Transformation Ratio:
  2.203 rotor to stator
• Shaft Thread Size:
  0.120 inches single shaft
• Terminal Type And Quantity:
  5 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-855-1056