Control Transformer Synchro

Features

Specifications

• Body Material:
  Aluminum
• Body Style:
  Standard round b
• Shoulder Diameter:
  1.0000 inches
• Pilot Diameter:
  0.6250 inches
• Flange Diameter:
  1.0620 inches
• Flange Thickness:
  0.0690 inches
• Undercut Width:
  0.0500 inches
• Shaft Diameter:
  0.1872 inches single shaft
• Shaft Length:
  0.6040 inches single shaft
• Body Size:
  11
• Stator Input Voltage Rating In Volts:
  11.8
• Stator Input Current Rating:
  138.0 milliamperes
• Stator Input Electrical Power Rating:
  290.0 milliwatts
• Frequency In Hertz:
  400.0
• Zro Resistance In Ohms:
  600.00
• Zso Resistance In Ohms:
  15.00
• Zrs Resistance In Ohms:
  570.00
• Rotor Dc Resistance In Ohms:
  340.00
• Stator Dc Resistance In Ohms:
  8.50
• Phase Shift Angle In Deg:
  5.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  30.00 input
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  70.00
• Electrical Error Angular Range In Minutes:
  -3.0/+3.0
• Spline Tooth Quantity:
  21 single shaft
• Actuator Friction Torque At Minus 55 Deg Celsius:
  16.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  6.0 centimeter-grams
• Pilot Length:
  0.0620 inches
• Shoulder Length:
  0.0620 inches
• Mounting Surface To Terminal End Distance:
  1.7130 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3020 inches single shaft
• Plus J Zro Reactance In Ohms:
  2730.00
• Plus J Zso Reactance In Ohms:
  72.00
• Plus J Zrs Reactance In Ohms:
  260.00
• Shaft Type:
  Spline w/threads single shaft
• Transformation Ratio:
  0.585 rotor to stator
• Shaft Thread Size:
  0.190 inches single shaft
• Terminal Type And Quantity:
  5 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-020-9689