Control Transformer Synchro

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round a
• Pilot Diameter:
  Between 0.4995 inches and 0.5000 inches
• Flange Diameter:
  Between 0.7470 inches and 0.7530 inches
• Flange Thickness:
  0.0620 inches
• Undercut Diameter:
  Between 0.6880 inches and 0.6910 inches
• Undercut Width:
  0.0620 inches
• Shaft Diameter:
  0.1872 inches single shaft
• Shaft Length:
  0.5400 inches single shaft
• Body Size:
  8
• Stator Input Voltage Rating In Volts:
  11.8
• Stator Input Current Rating:
  9.0 amperes
• Stator Input Electrical Power Rating:
  17.0 watts
• Frequency In Hertz:
  400.0
• Zro Resistance In Ohms:
  1300.00
• Zso Resistance In Ohms:
  250.00
• Zrs Resistance In Ohms:
  1550.00
• Rotor Dc Resistance In Ohms:
  81.000
• Stator Dc Resistance In Ohms:
  326.00
• Phase Shift Angle In Deg:
  7.500 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  26.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  30.00
• Electrical Error Angular Range In Minutes:
  -4.0/+4.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  6.00 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  3.00 centimeter-grams
• Pilot Length:
  Between 0.0380 inches and 0.0430 inches
• Mounting Surface To Terminal End Distance:
  1.2400 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a
• Terminal Location:
  Side
• Shaft Thread Length:
  0.3500 inches single shaft
• Plus J Zro Reactance In Ohms:
  6900.00
• Plus J Zso Reactance In Ohms:
  1230.00
• Plus J Zrs Reactance In Ohms:
  750.00
• Shaft Type:
  Round, threaded single shaft
• Transformation Ratio:
  2.203 rotor to stator
• Shaft Thread Size:
  0.250 inches single shaft
• Terminal Type And Quantity:
  5 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-942-6537