Control Transformer Synchro

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.8118 inches and 0.8123 inches
• Pilot Diameter:
  Between 0.4995 inches and 0.5000 inches
• Flange Diameter:
  Between 0.9360 inches and 0.9370 inches
• Flange Thickness:
  0.0630 inches
• Undercut Diameter:
  Between 0.8300 inches and 0.8500 inches
• Undercut Width:
  Between 0.0590 inches and 0.0650 inches
• Shaft Diameter:
  0.1245 inches single shaft and 0.1247 inches single shaft
• Shaft Length:
  1.1350 inches single shaft and 1.1890 inches single shaft
• Schematic Diagram Designator:
  1 y-rotor, 1 stator
• Fragility Factor:
  Moderately rugged
• End Application:
  4920-00-400-3818
• Securing Hole Quantity:
  3
• Body Size:
  10
• Stator Input Voltage Rating In Volts:
  11.8
• Stator Input Current Rating:
  24.0 milliamperes
• Stator Input Electrical Power Rating:
  34.0 milliwatts
• Frequency In Hertz:
  400.0
• Zro Resistance In Ohms:
  695.00
• Zso Resistance In Ohms:
  115.00
• Zrs Resistance In Ohms:
  874.00
• Phase Shift Angle In Deg:
  9.000 output to input
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  25.00 input
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  30.00
• Electrical Error Angular Range In Minutes:
  -15.0/+15.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  9.00 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  3.00 centimeter-grams
• Alignment Hole Quantity:
  3
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0005 inches
• Shaft End Play:
  0.0010 inches
• Pilot Length:
  0.0350 mils and 0.0410 centimeters
• Shoulder Length:
  0.0590 mils and 0.0650 centimeters
• Mounting Surface To Terminal End Distance:
  1.2400 inches
• Shaft Maximum Runout:
  0.0010 inches
• Mounting Facility Screw Thread Series Designator:
  Unf
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  2600.00
• Shaft Slot Depth:
  0.0250 inches single shaft
• Plus J Zso Reactance In Ohms:
  447.00
• Shaft Slot Width:
  0.0200 inches single shaft
• Plus J Zrs Reactance In Ohms:
  286.00
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Depth:
  0.0700 inches
• Mounting Facility Screw Thread Diameter:
  0.0860 inches
• Transformation Ratio:
  2.203 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  Between 0.6750 inches and 0.6810 inches
• Shaft Radial Play Determining Weight:
  4.0 ounces
• Shaft End Play Determining Weight:
  8.0 ounces
• Terminal Type And Quantity:
  6 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-402-0564