Control Transformer Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round d
• Shoulder Diameter:
  1.9900 inches
• Pilot Diameter:
  0.6000 inches
• Second Shoulder Diameter:
  1.9995 inches
• Second Shoulder Length:
  0.1700 inches
• Flange Diameter:
  2.2500 inches
• Flange Thickness:
  0.2500 inches
• Body Diameter:
  1.9900 inches
• Shaft Diameter:
  0.2403 inches single shaft and 0.2405 inches single shaft
• Shaft Length:
  0.7190 inches single shaft
• Maximum Tempurature Rise:
  20.0 degrees celsius
• Body Size:
  23
• Stator Input Voltage Rating In Volts:
  90.0
• Stator Input Current Rating:
  5.7 milliamperes
• Stator Input Electrical Power Rating:
  50.0 milliwatts
• Frequency In Hertz:
  500.0
• Zso Impedance Magnitude In Ohms:
  Between 13400.00 and 16700.00
• Zso Impedance Angle In Deg:
  Between 81.00 and 84.50
• Zrs Impedance Magnitude In Ohms:
  Between 1040.00 and 1260.00
• Zrs Impedance Angle In Deg:
  Between 46.00 and 56.00
• Phase Shift Angle In Deg:
  2.300 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  20.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  45.00
• Electrical Error Angular Range In Minutes:
  -3.0/+3.0
• Spline Tooth Quantity:
  22 single shaft
• Pilot Length:
  0.0430 inches
• Shoulder Length:
  0.1700 inches
• Aft Of First Flange Diameter:
  1.9995 inches
• Mounting Surface To Terminal End Distance:
  3.5800 inches
• Spline Tooth Diametral Pitch:
  96 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2900 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Transformation Ratio:
  0.735 rotor to stator
• Shaft Thread Size:
  0.250 inches single shaft
• Terminal Type And Quantity:
  5 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-812-1439