Control Transformer Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 1.3115 inches and 1.3120 inches
• Pilot Diameter:
  Between 0.4995 inches and 0.5000 inches
• Flange Diameter:
  Between 1.4360 inches and 1.4370 inches
• Flange Thickness:
  0.0930 inches
• Undercut Diameter:
  Between 1.3090 inches and 1.3120 inches
• Undercut Width:
  0.0780 inches
• Shaft Diameter:
  0.1195 inches single shaft and 0.1200 inches single shaft
• Shaft Length:
  0.4150 inches single shaft
• Body Size:
  15
• Stator Input Voltage Rating In Volts:
  11.8
• Stator Input Current Rating:
  28.0 milliamperes
• Stator Input Electrical Power Rating:
  43.0 milliwatts
• Frequency In Hertz:
  400.0
• Zro Resistance In Ohms:
  320.00
• Zso Resistance In Ohms:
  53.00
• Zrs Resistance In Ohms:
  315.00
• Rotor Dc Resistance In Ohms:
  180.00
• Stator Dc Resistance In Ohms:
  37.00
• Phase Shift Angle In Deg:
  4.500 input to output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  30.00
• Electrical Error Angular Range In Minutes:
  -5.0/+5.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  16.00 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  4.00 centimeter-grams
• Alignment Hole Quantity:
  4
• Pilot Length:
  0.0400 inches
• Shoulder Length:
  0.1320 inches
• Mounting Surface To Terminal End Distance:
  1.7600 inches
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  2030.00
• Shaft Slot Depth:
  0.0220 inches single shaft and 0.0320 inches single shaft
• Plus J Zso Reactance In Ohms:
  353.00
• Shaft Slot Width:
  0.0220 inches single shaft and 0.0320 inches single shaft
• Plus J Zrs Reactance In Ohms:
  225.00
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Bolt Circle Diameter:
  0.8750 inches
• Terminal Type And Quantity:
  5 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-967-6267