Control Transformer Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round b
• Shoulder Diameter:
  1.0000 inches
• Pilot Diameter:
  0.6250 inches
• Flange Diameter:
  1.0620 inches
• Flange Thickness:
  0.0930 inches
• Undercut Width:
  0.0620 inches
• Shaft Diameter:
  0.1872 inches single shaft
• Shaft Length:
  0.5620 inches single shaft
• Maximum Tempurature Rise:
  10.0 degrees celsius
• Securing Hole Quantity:
  4
• Stator Input Voltage Rating In Volts:
  11.8
• Stator Input Current Rating:
  86.0 milliamperes
• Stator Input Electrical Power Rating:
  150.0 watts
• Frequency In Hertz:
  Between 396.0 and 404.0
• Zso Impedance Magnitude In Ohms:
  Between 118.00 and 150.00
• Zso Impedance Angle In Deg:
  Between 78.00 and 84.00
• Zrs Impedance Magnitude In Ohms:
  Between 130.00 and 170.00
• Zrs Impedance Angle In Deg:
  Between 23.00 and 35.00
• Phase Shift Angle In Deg:
  Between 3.000 input to output and 6.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  15.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  18.00
• Electrical Error Angular Range In Minutes:
  -7.0/+7.0
• Spline Tooth Quantity:
  21 single shaft
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.07 inch-ounces
• Pilot Length:
  0.0620 inches
• Shoulder Length:
  0.0620 inches
• Mounting Surface To Terminal End Distance:
  1.7320 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a
• Mounting Facility Screw Thread Series Designator:
  Unc
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.1970 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Mounting Facility Screw Thread Diameter:
  0.112 inches
• Shaft Thread Size:
  0.190 inches single shaft
• Test Data Document:
  81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  5 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-341-3194