Differential Transmitter Synchro

Features

Specifications

• Body Material:
  Aluminum
• Body Style:
  Standard round double flange a
• Shoulder Diameter:
  4.8740 inches
• Pilot Diameter:
  1.7500 inches
• Second Shoulder Diameter:
  5.5000 inches
• Second Shoulder Length:
  0.5000 inches
• Flange Diameter:
  Between 5.7480 inches and 5.7500 inches
• Flange Thickness:
  Between 0.2450 inches and 0.2500 inches
• Body Diameter:
  5.3750 inches
• Shaft Diameter:
  0.3500 inches single shaft and 0.3505 inches single shaft
• Shaft Length:
  1.0320 inches single shaft
• Shaft Undercut Width:
  0.0600 inches single shaft
• Distance Between Flanges:
  3.2500 inches
• Maximum Tempurature Rise:
  50.0 degrees celsius
• Body Size:
  58
• Stator Input Voltage Rating In Volts:
  115.0
• Stator Input Current Rating:
  3.5 amperes
• Stator Input Electrical Power Rating:
  30.0 watts
• Frequency In Hertz:
  60.0
• Zro Resistance In Ohms:
  400.00
• Electrical Error Angular Range In Minutes:
  -18.0/+18.0
• Torque Gradient Per Angular Deg:
  4.000 inch-ounces
• Pilot Length:
  0.2500 inches
• Shoulder Length:
  1.0600 inches
• Aft Of Second Flange Diameter:
  4.8750 inches
• Mounting Surface To Terminal End Distance:
  6.6180 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  660.00
• Shaft Tapered End Minor Diameter:
  0.2500 inches single shaft
• Shaft Type:
  Round, tapered, threaded, undercut single shaft
• Transformation Ratio:
  0.990 rotor to stator
• Shaft Taper Angle In Deg:
  3.5 single shaft
• Shaft Tip Length:
  0.2200 inches single shaft
• Shaft Taper Length:
  0.3750 inches single shaft
• Shaft Thread Size:
  0.250 inches single shaft
• Shaft Undercut Diameter:
  0.0600 inches single shaft
• Test Data Document:
  81349-mil-s-2335 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  6 screw
• Specification Data:
  81349-mil-s-2335 government specification
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-644-0088
• Special Features:
  Shaft keyed with no. 00 woodruff keywhitney no. 207