Differential Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round d
• Shoulder Diameter:
  Between 2.6950 inches and 2.7000 inches
• Pilot Diameter:
  0.5000 inches
• Second Shoulder Diameter:
  Between 2.7490 inches and 2.7500 inches
• Second Shoulder Length:
  0.3750 inches
• Flange Diameter:
  Between 3.0990 inches and 3.1000 inches
• Flange Thickness:
  0.2500 inches
• Body Diameter:
  2.7000 centimeters
• Shaft Diameter:
  0.2403 inches single shaft and 0.2405 inches single shaft
• Shaft Length:
  0.7300 inches single shaft
• Fragility Factor:
  Moderately rugged
• Maximum Tempurature Rise:
  20.0 degrees celsius
• Body Size:
  31
• Stator Input Voltage Rating In Volts:
  90.0
• Stator Input Current Rating:
  190.0 milliamperes
• Stator Input Electrical Power Rating:
  10.2 watts
• Frequency In Hertz:
  400.0
• Zrs Impedance Magnitude In Ohms:
  4.80
• Zrs Impedance Angle In Deg:
  44.00
• Rotor Dc Resistance In Ohms:
  1.20
• Stator Dc Resistance In Ohms:
  1.00
• Phase Shift Angle In Deg:
  1.500 input to output
• Electrical Error Angular Range In Minutes:
  -8.0/+8.0
• Spline Tooth Quantity:
  22 single shaft
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.50 inch-ounces
• Torque Gradient Per Angular Deg:
  0.600 inch-ounces
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0008 inches
• Shaft End Play:
  0.0030 inches
• Pilot Length:
  0.0300 inches
• Shoulder Length:
  0.6150 inches
• Aft Of First Flange Diameter:
  2.7500 inches
• Mounting Surface To Terminal End Distance:
  4.6250 inches
• Spline Tooth Diametral Pitch:
  96 single shaft
• Shaft Maximum Runout:
  0.0008 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3640 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Transformation Ratio:
  1.154 rotor to stator
• Shaft Thread Size:
  0.2500 inches single shaft
• Shaft Radial Play Determining Weight:
  16.0 ounces
• Shaft End Play Determining Weight:
  16.0 ounces
• Test Data Document:
  81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  6 screw
• Specification Data:
  81349-mil-s-20708/64 government specification
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-925-6614