Differential Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round d
• Shoulder Diameter:
  Between 1.9850 inches and 1.9900 inches
• Pilot Diameter:
  Between 0.5900 inches and 0.6000 inches
• Second Shoulder Diameter:
  Between 1.9985 inches and 1.9995 inches
• Second Shoulder Length:
  Between 0.1680 inches and 0.1700 inches
• Flange Diameter:
  Between 2.2490 inches and 2.2500 inches
• Flange Thickness:
  Between 0.2480 inches and 0.2500 inches
• Body Diameter:
  Between 1.9850 inches and 1.9900 inches
• Shaft Diameter:
  0.2402 inches single shaft and 0.2405 inches single shaft
• Shaft Length:
  0.6930 inches single shaft and 0.7190 inches single shaft
• Fragility Factor:
  Moderately rugged
• Maximum Tempurature Rise:
  45.0 degrees celsius
• Body Size:
  23
• Stator Input Voltage Rating In Volts:
  115.0
• Stator Input Current Rating:
  75.0 milliamperes
• Stator Input Electrical Power Rating:
  1.6 watts
• Frequency In Hertz:
  60.0
• Zro Resistance In Ohms:
  236.00
• Zso Resistance In Ohms:
  217.00
• Zrs Resistance In Ohms:
  485.00
• Zso-9 Designator Resistance In Ohms:
  206.00
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  75.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  100.00
• Electrical Error Angular Range In Minutes:
  -8.0/+8.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  0.50 inch-ounces
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.20 inch-ounces
• Alignment Hole Quantity:
  3
• Pilot Length:
  Between 0.0360 inches and 0.0460 inches
• Shoulder Length:
  0.2500 inches
• Aft Of First Flange Diameter:
  Between 1.9985 inches and 1.9995 inches
• Mounting Surface To Terminal End Distance:
  3.4450 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3100 inches single shaft and 0.3300 inches single shaft
• Plus J Zro Reactance In Ohms:
  1590.00
• Plus J Zso Reactance In Ohms:
  796.00
• Plus J Zrs Reactance In Ohms:
  167.00
• Shaft Type:
  Round, threaded single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.783 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  1.6420 inches
• Plus J Zso-9 Designator Reactance In Ohms:
  271.00
• Shaft Thread Size:
  0.2500 inches single shaft
• Test Data Document:
  81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  5 screw
• Specification Data:
  81349-mil-s-20708/94 government specification
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-851-2793
• Special Features:
  Slotted keyway full length of shaft