Differential Transmitter Synchro

Features

Specifications

• Body Material:
  Aluminum
• Body Style:
  Standard round double flange a
• Shoulder Diameter:
  3.3340 inches
• Pilot Diameter:
  1.6300 inches
• Second Shoulder Diameter:
  3.3700 inches
• Second Shoulder Length:
  0.3750 inches
• Flange Diameter:
  Between 3.6230 inches and 3.6250 inches
• Flange Thickness:
  Between 0.2460 inches and 0.2500 inches
• Body Diameter:
  3.3900 inches
• Shaft Diameter:
  0.2498 inches single shaft and 0.2500 inches single shaft
• Shaft Length:
  0.7700 inches single shaft
• Fragility Factor:
  Moderately rugged
• Distance Between Flanges:
  1.8120 inches
• Body Size:
  37
• Stator Input Voltage Rating In Volts:
  90.0
• Stator Input Current Rating:
  550.0 milliamperes
• Stator Input Electrical Power Rating:
  4.25 watts
• Frequency In Hertz:
  Between 50.0 and 60.0
• Rotor Dc Resistance In Ohms:
  14.60
• Stator Dc Resistance In Ohms:
  10.50
• Phase Shift Angle In Deg:
  6.000 input to output
• Electrical Error Angular Range In Minutes:
  -18.0/+18.0
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.50 inch-ounces
• Torque Gradient Per Angular Deg:
  0.300 inch-ounces
• Alignment Hole Quantity:
  5
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0010 inches
• Shaft End Play:
  Between 0.0010 inches and 0.0050 inches
• Pilot Length:
  Between 0.0200 inches and 0.0400 inches
• Shoulder Length:
  0.7850 inches
• Mounting Surface To Terminal End Distance:
  3.7680 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3020 inches single shaft and 0.3220 inches single shaft
• Shaft Type:
  Round, threaded single shaft
• Alignment Hole Depth:
  0.5000 inches
• Transformation Ratio:
  1.000 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  3.0000 inches
• Shaft Thread Size:
  0.250 inches single shaft
• Shaft Radial Play Determining Weight:
  48.0 ounces
• Shaft End Play Determining Weight:
  48.0 ounces
• Terminal Type And Quantity:
  6 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-01-311-3710
• Special Features:
  Shaft is also slotted, 0.032 in. Wide by 0.047 in. Deep