Electrical Resolver
0D10101
(NSN) National Stock Number
5990-00-644-0076
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
22966
Schedule B Code
9018903000
Summary
Steel, corrosion resisting body material, standard round d body style, 1.9850 inches minimum and 1.9900 inches maximum shoulder diameter, 0.5990 inches minimum and 0.6000 inches maximum pilot diameter, 1.9850 inches minimum and 1.9995 inches maximum second shoulder diameter, 0.1700 inches maximum second shoulder length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22966 | A07800 | - | 1 |
Specifications
Body Material
steel, corrosion resisting
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round d
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
1.9850 inches minimum and 1.9900 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.5990 inches minimum and 0.6000 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Second Shoulder Diameter
1.9850 inches minimum and 1.9995 inches maximum
Details
None.Second Shoulder Length
0.1700 inches maximum
Details
None.Overall Length
4.7360 inches minimum and 4.7870 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
2.2490 inches minimum and 2.2500 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.2480 inches minimum and 0.2500 inches maximum
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Body Diameter
0.9850 inches minimum and 1.9900 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the circumference.Shaft Diameter
0.2402 inches minimum single shaft and 0.2405 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.6930 inches minimum single shaft and 0.7190 inches maximum single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Size
23
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
30.0 maximum
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Frequency In Hertz
1000.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Dc Resistance In Ohms
1.80 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
2.60 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Compensation Method
winding compensated
Details
The means utilized to vary the level of signal input or response to attain the desired operational action.Compensator Dc Resistance In Ohms
5.80 nominal
Details
The opposition that the compensator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
1.900 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
20.00 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Maximum Total Null Voltage Output In Millivolts Per Volt
30.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Pilot Length
0.0460 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.2420 inches minimum and 0.2520 inches maximum
Details
None.Aft Of First Flange Diameter
1.9985 inches minimum and 1.9995 inches maximum
Details
None.Mounting Surface To Terminal End Distance
3.9230 inches minimum and 3.9380 inches maximum
Details
None.Shaft Thread Series Designator
unf single shaft
Details
A designation distinguishing one group of shaft thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Shaft Thread Direction
right-hand single shaft
Details
The direction of the shaft thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Shaft Thread Class
2a single shaft
Details
A numeric-alpha designator indicating the ptich diameter tolerance,and an external or internal shaft thread.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Shaft Thread Length
0.3100 inches nominal single shaft
Details
A measurement of the extent of the shaft threads measured on a line parallel to the longitudinal axis.Shaft Type
round, threaded single shaft
Details
Indicates the type of shaft included on the item.Transformation Ratio
0.090 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Shaft Nominal Thread Size
0.250 inches single shaft
Details
The length of a straight line passing through the center of the shaft threaded portion,with terminated points at the circumference.Terminal Type And Quantity
8 screw
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| VRA23-41-10A | 10112 | 1 | - | 3 | 2 | - | TX |
| 12Z13010-60 | 10001 | 6 | - | 3 | 2 | - | TX |
| 113D8H | 97497 | 5 | - | 5 | 9 | - | 48 |
| 13-320 | 97497 | 1 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
GENERAL DYNAMICS MOTION CONTROL LLC
CAGE: 10112
SAN DIEGO
, CA
, 92154-8217
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-644-0076
What is the NIIN of the NSN 5990-00-644-0076?
The National Item Identification Number (NIIN) of the NSN 5990-00-644-0076 is 00-644-0076
When the NSN 5990-00-644-0076 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5990-00-644-0076 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-644-0076 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products