Electrical Resolver
1126276
(NSN) National Stock Number
5990-00-765-1264
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
22966
Schedule B Code
9018903000
Summary
Steel, corrosion resisting body material, standard round b body style, 1.3120 inches maximum shoulder diameter, 0.8750 inches maximum pilot diameter, 2.8050 inches maximum overall length, 1.4370 inches maximum flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | XX |
Identification
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22966 | A07800 | - | 1 |
Specifications
Body Material
steel, corrosion resisting
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round b
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
1.3120 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.8750 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
2.8050 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.4370 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0930 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Width
0.0780 inches nominal
Details
None.Shaft Diameter
0.1872 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.5000 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Maximum Temp Rise
30.0 deg celsius
Details
The maximum permissible temperature increase in the item as a result of its operation under normal conditions.Body Size
15
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
32.0 maximum
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Stator Input Current Rating
57.0 milliamperes maximum
Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Stator Input Electrical Power Rating
270.0 milliwatts maximum
Details
The value of the primary /electrical/ excitation power for which the stator is rated.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Zso Impedance Magnitude In Ohms
575.00 nominal
Details
The magnitude part /z/ of the stator impedance with the rotor open /zso/,expressed in ohms.Zso Impedance Angle In Deg
81.00 nominal
Details
The angle part /o/ of the stator impedance with the rotor open /zso/,expressed in degrees.Rotor Dc Resistance In Ohms
57.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
15.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Transformation Ratio Equality In Percent
0.2 nominal
Details
The variation of the transformation ratio for all possible combinations of stator,rotor,and compensating windings,expressed in percent.Phase Shift Angle In Deg
5.700 output to input nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
0.707 input
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Maximum Total Null Voltage Output In Millivolts Per Volt
0.884
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Interaxis Error Angular Range In Minutes
-1.0 to 1.0
Details
The deviation from 90 degrees perpendicularity of the secondary winding,when excitation is applied to one of the primary windings,expressed in minutes.Output Voltage Functional Error Range In Percent
-0.2 to 0.2
Details
The limits of permissible deviation of the actual output voltage form the theoretical sinusoidal output voltage divided by the maximum output,expressed in percent.Electrical Error Angular Range In Minutes
-2.0 to 2.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Spline Tooth Quantity
21 single shaft
Details
The number of individual teeth on the splined portion of the shaft.Actuator Friction Torque At Minus 55 Deg Celsius
0.60 inch-ounces maximum
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.Actuator Friction Torque At Plus 25 Deg Celsius
0.20 inch-ounces maximum
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Alignment Hole Quantity
4
Details
The number of holes provided for aligning the item.Shaft Maximum Radial Play
0.0004 inches
Details
The maximum shaft displacement perpendicular to the shaft axis due to reversal of a specified force applied perpendicular to the shaft axis,and measured at a specified distance from the front surface of the unit.Shaft End Play
0.0015 inches maximum
Details
The axial shaft displacement due to reversal of a specified axial force,measured at the end of the shaft.Terminal Designator And Schematic Position
connection r1 position e and connection r2 position f and connection r3 position c and connection s1 position b and connection s2 position c and connection s3 position a
Details
A designation identifying the electrical connection facility provided for each termination of the item,and its location on the schematic diagram.Pilot Length
0.0400 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.1320 inches nominal
Details
None.Mounting Surface To Terminal End Distance
1.9300 inches maximum
Details
None.Spline Tooth Diametral Pitch
120 single shaft
Details
The number of teeth the splined shaft has per inch of pitch diameter.Shaft Maximum Runout
0.0010 inches
Details
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated.Shaft Thread Series Designator
unf single shaft
Details
A designation distinguishing one group of shaft thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Shaft Thread Direction
right-hand single shaft
Details
The direction of the shaft thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Shaft Thread Class
2a single shaft
Details
A numeric-alpha designator indicating the ptich diameter tolerance,and an external or internal shaft thread.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Shaft Thread Length
0.2000 inches nominal single shaft
Details
A measurement of the extent of the shaft threads measured on a line parallel to the longitudinal axis.Shaft Type
spline w/threads single shaft
Details
Indicates the type of shaft included on the item.Alignment Hole Depth
0.1250 inches nominal
Details
None.Transformation Ratio
0.450 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Alignment Hole Bolt Circle Diameter
1.1000 inches nominal
Details
None.Shaft Nominal Thread Size
0.190 inches single shaft
Details
The length of a straight line passing through the center of the shaft threaded portion,with terminated points at the circumference.Shaft End Play Determining Weight
8.0 ounces
Details
The force (load) applied parallel to the shaft axis to determine end play.Terminal Type And Quantity
6 solder stud
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 1829796 | 10112 | 5 | - | 5 | 9 | - | TX |
| RE15-4S | 10112 | 5 | - | 5 | 2 | - | ZZ |
| 1829796 | 10001 | A | - | 3 | 2 | - | TX |
| 15RS4L | 95542 | 5 | - | 5 | 2 | - | TX |
| 670499 | 56232 | X | - | 5 | 2 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5990-00-765-1264
What is the NIIN of the NSN 5990-00-765-1264?
The National Item Identification Number (NIIN) of the NSN 5990-00-765-1264 is 00-765-1264
When the NSN 5990-00-765-1264 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Mon, Jan 1, 1962
Does the NSN 5990-00-765-1264 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-765-1264 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products