Electrical Resolver

Features

Specifications

• Body Material:
  Aluminum
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9997 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  Between 1.0570 inches and 1.0750 inches
• Flange Thickness:
  Between 0.0900 inches and 0.0960 inches
• Undercut Diameter:
  0.9750 inches
• Undercut Width:
  Between 0.0570 inches and 0.0670 inches
• Shaft Diameter:
  0.1870 inches single shaft and 0.1872 inches single shaft
• Shaft Length:
  0.4610 inches single shaft and 0.4750 inches single shaft
• Maximum Tempurature Rise:
  20.0 degrees celsius
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  145.0 milliamperes
• Rotor Input Electrical Power Rating:
  760.0 milliwatts
• Zro Resistance In Ohms:
  36.00
• Zso Resistance In Ohms:
  7.00
• Zrs Resistance In Ohms:
  38.50
• Zss Resistance In Ohms:
  9.30
• Phase Shift Angle In Deg:
  7.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  20.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  30.00
• Actuator Friction Torque At Minus 55 Deg Celsius:
  25.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  15.0 centimeter-grams
• Alignment Hole Quantity:
  4
• Pilot Length:
  Between 0.0590 inches and 0.0650 inches
• Shoulder Length:
  Between 0.0590 inches and 0.0650 inches
• Mounting Surface To Terminal End Distance:
  1.8600 inches
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  175.00
• Plus J Zso Reactance In Ohms:
  41.50
• Plus J Zrs Reactance In Ohms:
  17.80
• Shaft Type:
  Round single shaft
• Alignment Hole Depth:
  0.1250 inches
• Plus J Zss Reactance In Ohms:
  4.70
• Transformation Ratio:
  0.454 stator to rotor
• Alignment Hole Bolt Circle Diameter:
  0.8120 inches
• Test Data Document:
  81349-mil-r-21530 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  8 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-780-8915