Electrical Resolver

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round a
• Pilot Diameter:
  Between 1.8740 inches and 1.8750 inches
• Flange Diameter:
  Between 1.9950 inches and 2.0050 inches
• Flange Thickness:
  Between 0.0880 inches and 0.0980 inches
• Undercut Diameter:
  1.8750 inches
• Undercut Width:
  0.0730 inches
• Shaft Diameter:
  0.0895 inches single shaft and 0.0900 inches single shaft
• Shaft Length:
  0.4100 inches single shaft and 0.4400 inches single shaft
• Fragility Factor:
  Moderately rugged
• Maximum Tempurature Rise:
  10.0 degrees celsius
• Body Size:
  20
• Stator Input Voltage Rating In Volts:
  20.0
• Stator Input Current Rating:
  30.0 milliamperes
• Frequency In Hertz:
  400.0
• Zro Impedance Magnitude In Ohms:
  500.00
• Zso Impedance Magnitude In Ohms:
  500000.00
• Zso Impedance Angle In Deg:
  35.00
• Transformation Ratio Equality In Percent:
  0.1
• Compensation Method:
  Winding compensated
• Phase Shift Angle In Deg:
  0.100 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  20.00 input
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  25.00
• Interaxis Error Angular Range In Minutes:
  -3.0/+3.0
• Output Voltage Functional Error Range In Percent:
  -0.1/+0.1
• Electrical Error Angular Range In Minutes:
  -3.0/+3.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  30.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  15.0 centimeter-grams
• Shaft Radial Play Test Point:
  0.250 inches
• Shaft Maximum Radial Play:
  0.0008 inches
• Shaft End Play:
  Between 0.0005 inches and 0.0015 inches
• Terminal Designator And Schematic Position:
  Connection r1 position h and connection r2 position g and connection r3 position e and connection r4 position j and connection s1 position l and connection s2 position m and connection s3 position k and connection s4 position n and connection c1 position d and connection c2 position c and connection c3 position a and connection c4 position b
• Pilot Length:
  0.0380 mils and 0.0480 centimeters
• Mounting Surface To Terminal End Distance:
  1.1650 inches
• Shaft Maximum Runout:
  0.0010 inches
• Terminal Location:
  Side
• Shaft Type:
  Round single shaft
• Transformation Ratio:
  1.000 rotor to stator
• Shaft Radial Play Determining Weight:
  4.0 ounces
• Shaft End Play Determining Weight:
  8.0 ounces
• Terminal Type And Quantity:
  12 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-01-025-7464