Electrical Resolver

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  Between 1.0570 inches and 1.0650 inches
• Flange Thickness:
  0.0930 inches
• Undercut Diameter:
  0.9750 inches
• Undercut Width:
  0.0500 inches
• Shaft Diameter:
  0.1195 inches single shaft and 0.1200 inches single shaft
• Shaft Length:
  0.3640 inches single shaft and 0.3880 inches single shaft
• Fragility Factor:
  Moderately rugged
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  176.0 milliamperes
• Rotor Input Electrical Power Rating:
  900.0 milliwatts
• Zro Impedance Magnitude In Ohms:
  170.00
• Zro Impedance Angle In Deg:
  77.00
• Zso Impedance Magnitude In Ohms:
  42.00
• Zso Impedance Angle In Deg:
  80.50
• Zrs Impedance Magnitude In Ohms:
  44.00
• Zrs Impedance Angle In Deg:
  24.00
• Zss Impedance Magnitude In Ohms:
  11.00
• Zss Impedance Angle In Deg:
  27.50
• Rotor Dc Resistance In Ohms:
  24.00
• Stator Dc Resistance In Ohms:
  4.20
• Phase Shift Angle In Deg:
  8.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  15.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  20.00
• Electrical Error Angular Range In Minutes:
  -3.0/+3.0
• Electrical Error Angular Range In Minutes:
  -3.0 to 3.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  16.00 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  4.00 centimeter-grams
• Alignment Hole Quantity:
  4
• Pilot Length:
  0.0620 inches
• Shoulder Length:
  0.0620 inches
• Mounting Surface To Terminal End Distance:
  1.8280 inches
• Terminal Location:
  Rear
• Shaft Slot Depth:
  0.0300 inches single shaft
• Shaft Slot Width:
  0.0250 inches single shaft
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.454 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  0.8120 inches
• Terminal Type And Quantity:
  8 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-069-2221