Electrical Resolver

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round b
• Shoulder Diameter:
  1.3120 inches
• Pilot Diameter:
  0.8500 inches
• Flange Diameter:
  1.4370 inches
• Flange Thickness:
  0.0930 inches
• Undercut Width:
  0.0780 inches
• Shaft Diameter:
  0.1872 inches single shaft
• Shaft Length:
  0.5000 inches single shaft
• Schematic Diagram Designator:
  D15 2 rotor, 1 stator, 1 compensator
• Schematic Diagram Designator:
  2 rotor, 1 stator, 1 compensator
• Fragility Factor:
  Moderately rugged
• Body Size:
  15
• Stator Input Voltage Rating In Volts:
  30.0
• Stator Input Current Rating:
  135.0 milliamperes
• Stator Input Electrical Power Rating:
  700.0 milliwatts
• Frequency In Hertz:
  1000.0
• Zro Impedance Magnitude In Ohms:
  200.00
• Zro Impedance Angle In Deg:
  81.00
• Rotor Dc Resistance In Ohms:
  12.00
• Stator Dc Resistance In Ohms:
  16.00
• Compensation Method:
  Winding compensated
• Compensator Dc Resistance In Ohms:
  32.00
• Phase Shift Angle In Deg:
  4.200 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  20.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  30.00
• Interaxis Error Angular Range In Minutes:
  -5.0/+5.0
• Electrical Error Angular Range In Minutes:
  -7.0/+7.0
• Spline Tooth Quantity:
  21 single shaft
• Actuator Friction Torque At Plus 25 Deg Celsius:
  4.0 centimeter-grams
• Alignment Hole Quantity:
  4
• Shaft Maximum Radial Play:
  0.0008 inches
• Shaft End Play:
  Between 0.0005 inches and 0.0015 inches
• Terminal Designator And Schematic Position:
  Connection r1 position c and connection r2 position j and connection r3 position d and connection r4 position g and connection s1 position a and connection s3 position b and connection c1 position k and connection c2 position l
• Pilot Length:
  0.0400 inches
• Shoulder Length:
  0.1320 inches
• Mounting Surface To Terminal End Distance:
  2.0510 inches
• Spline Tooth Diametral Pitch:
  175 single shaft
• Shaft Maximum Runout:
  0.0010 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2000 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Alignment Hole Depth:
  0.1870 inches
• Transformation Ratio:
  1.000 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  1.1000 inches
• Shaft Thread Size:
  0.185 inches single shaft
• Terminal Type And Quantity:
  12 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-127-6749