Electrical Resolver

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round c
• Shoulder Diameter:
  1.0000 inches
• Pilot Diameter:
  0.6250 inches
• Flange Diameter:
  1.0620 inches
• Flange Thickness:
  0.0930 inches
• Undercut Diameter:
  0.9750 inches
• Undercut Width:
  0.0620 inches
• Shaft Diameter:
  0.1872 inches single shaft
• Shaft Length:
  0.4930 inches single shaft
• Body Size:
  11
• Stator Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Zso Resistance In Ohms:
  428.00
• Zro Impedance Magnitude In Ohms:
  2080.00
• Zro Impedance Angle In Deg:
  76.50
• Rotor Dc Resistance In Ohms:
  420.00
• Stator Dc Resistance In Ohms:
  305.00
• Transformation Ratio Equality In Percent:
  0.1
• Compensation Method:
  Winding compensated
• Compensator Transformation Ratio In Percent:
  0.990 rotor to compensator
• Phase Shift Angle In Deg:
  8.500 output to input
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  10.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  10.00
• Output Voltage Functional Error Range In Percent:
  -0.1/+0.1
• Spline Tooth Quantity:
  21 single shaft
• Actuator Friction Torque At Minus 55 Deg Celsius:
  16.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  4.0 centimeter-grams
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0005 inches
• Shaft End Play:
  Between 0.0005 inches and 0.0015 inches
• Pilot Length:
  0.0620 inches
• Shoulder Length:
  0.0620 inches
• Mounting Surface To Terminal End Distance:
  2.0000 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Maximum Runout:
  0.0008 inches
• Terminal Location:
  Rear
• Plus J Zso Reactance In Ohms:
  1960.00
• Shaft Type:
  Pinion single shaft
• Transformation Ratio:
  0.975 rotor to stator
• Terminal Type And Quantity:
  12 tab w/screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-898-2675