Electrical Resolver

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round b
• Shoulder Diameter:
  Between 1.1315 inches and 1.3120 inches
• Pilot Diameter:
  Between 0.8745 inches and 0.8750 inches
• Flange Diameter:
  Between 1.4340 inches and 1.4370 inches
• Flange Thickness:
  Between 0.0900 inches and 0.0960 inches
• Undercut Width:
  0.0780 inches
• Shaft Diameter:
  0.1870 inches single shaft and 0.1872 inches single shaft
• Shaft Length:
  0.5300 inches single shaft and 0.5500 inches single shaft
• Securing Hole Quantity:
  3
• Body Size:
  15
• Stator Input Voltage Rating In Volts:
  5.0
• Stator Input Current Rating:
  6.2 milliamperes
• Stator Input Electrical Power Rating:
  30.0 milliwatts
• Frequency In Hertz:
  Between 29.7 and 30.3
• Zro Resistance In Ohms:
  1250.00
• Zso Resistance In Ohms:
  670.00
• Zrs Resistance In Ohms:
  1900.00
• Zss Resistance In Ohms:
  930.00
• Rotor Dc Resistance In Ohms:
  Between 1116.00 and 1364.00
• Stator Dc Resistance In Ohms:
  Between 576.00 and 704.00
• Phase Shift Angle In Deg:
  50.000 input to output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  40.00
• Interaxis Error Angular Range In Minutes:
  -15.0/+15.0
• Spline Tooth Quantity:
  21 single shaft
• Actuator Friction Torque At Plus 25 Deg Celsius:
  4.0 centimeter-grams
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0004 inches
• Shaft End Play:
  0.0015 inches
• Pilot Length:
  Between 0.0370 inches and 0.0430 inches
• Shoulder Length:
  Between 0.1290 inches and 0.1350 inches
• Mounting Surface To Terminal End Distance:
  Between 1.7750 inches and 1.7810 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Maximum Runout:
  0.0008 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Mounting Facility Screw Thread Series Designator:
  Unc
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2100 inches single shaft
• Plus J Zro Reactance In Ohms:
  1350.00
• Plus J Zso Reactance In Ohms:
  650.00
• Plus J Zrs Reactance In Ohms:
  700.00
• Shaft Type:
  Spline w/threads single shaft
• Mounting Facility Screw Thread Diameter:
  0.120 inches
• Plus J Zss Reactance In Ohms:
  300.00
• Transformation Ratio:
  Between 0.960 stator to rotor and 1.040 stator to rotor
• Shaft Thread Size:
  0.184 inches single shaft
• Shaft Radial Play Determining Weight:
  8.0 ounces
• Shaft End Play Determining Weight:
  8.0 ounces
• Terminal Type And Quantity:
  8 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-01-015-7502