Electrical Resolver

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round, rotatable housing
• Shoulder Diameter:
  Between 1.9900 inches and 1.9930 inches
• Flange Diameter:
  Between 2.2495 inches and 2.2500 inches
• Flange Thickness:
  Between 0.2470 inches and 0.2530 inches
• Body Diameter:
  1.9060 inches
• Shaft Diameter:
  0.2470 inches single shaft
• Shaft Length:
  0.7190 inches single shaft
• Schematic Diagram Designator:
  D1 2 rotor, 2 stator
• Schematic Diagram Designator:
  2 rotor, 2 stator
• Body Size:
  23
• Stator Input Voltage Rating In Volts:
  20.0
• Rotor Input Voltage Rating In Volts:
  20.0
• Frequency In Hertz:
  400.0
• Zro Resistance In Ohms:
  110.00
• Zso Resistance In Ohms:
  22.00
• Zrs Resistance In Ohms:
  123.00
• Rotor Dc Resistance In Ohms:
  120.00
• Stator Dc Resistance In Ohms:
  130.00
• Phase Shift Angle In Deg:
  Between 0.800 input to output and 1.600 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  30.00 input
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  70.00
• Electrical Error Angular Range In Minutes:
  -7.0/+7.0
• Spline Tooth Quantity:
  106 single shaft
• Actuator Friction Torque At Minus 55 Deg Celsius:
  5.00 inch-ounces
• Actuator Friction Torque At Plus 25 Deg Celsius:
  1.00 inch-ounces
• Shoulder Length:
  0.4100 inches
• Mounting Surface To Terminal End Distance:
  3.4630 inches
• Spline Tooth Diametral Pitch:
  48 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3250 inches single shaft
• Plus J Zro Reactance In Ohms:
  520.00
• Plus J Zso Reactance In Ohms:
  123.00
• Plus J Zrs Reactance In Ohms:
  53.00
• Shaft Type:
  Spline w/threads single shaft
• Transformation Ratio:
  1.000 rotor to stator
• Shaft Thread Size:
  0.190 inches single shaft
• Test Data Document:
  03538-7753719+1 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
• Terminal Type And Quantity:
  8 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-542-3775