Electrical Resolver

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  Between 1.0570 inches and 1.0650 inches
• Flange Thickness:
  0.0930 inches
• Undercut Diameter:
  Between 0.9745 inches and 0.9750 inches
• Undercut Width:
  0.0500 inches
• Shaft Diameter:
  0.1900 inches single shaft
• Shaft Length:
  0.5450 inches single shaft and 0.5650 inches single shaft
• Maximum Tempurature Rise:
  85.0 degrees celsius
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  9.0
• Frequency In Hertz:
  4000.0
• Rotor Input Current Rating:
  2.6 milliamperes
• Rotor Input Electrical Power Rating:
  10.0 milliwatts
• Zro Resistance In Ohms:
  Between 3720.00 and 4467.00
• Zss Resistance In Ohms:
  Between 121.00 and 145.00
• Zro Impedance Magnitude In Ohms:
  Between 68.00 and 73.00
• Zss Impedance Magnitude In Ohms:
  Between 65.00 and 69.00
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  15.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  20.00
• Interaxis Error Angular Range In Minutes:
  -7.0/+7.0
• Spline Tooth Quantity:
  21 single shaft
• Alignment Hole Quantity:
  4
• Pilot Length:
  0.0620 inches
• Shoulder Length:
  0.0620 inches
• Mounting Surface To Terminal End Distance:
  Between 2.3340 inches and 2.3540 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2550 inches single shaft
• Shaft Type:
  Round, threaded single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.497 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  Between 0.8090 inches and 0.8150 inches
• Shaft Thread Size:
  0.190 inches single shaft
• Test Data Document:
  81349-mil-r-23417 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  7 screw
• Specification Data:
  81349-mil-r-23417/25 government specification
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-099-0700