Electrical Resolver

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.8118 inches and 0.8123 inches
• Pilot Diameter:
  Between 0.4995 inches and 0.5000 inches
• Flange Diameter:
  Between 0.9360 inches and 0.9370 inches
• Flange Thickness:
  0.0625 inches
• Undercut Diameter:
  Between 0.8350 inches and 0.8400 inches
• Undercut Width:
  0.0625 inches
• Shaft Diameter:
  0.0880 inches single shaft and 0.0900 inches single shaft
• Shaft Length:
  0.3750 inches single shaft
• Schematic Diagram Designator:
  1 rotor, 2 stator
• Fragility Factor:
  Moderately rugged
• Body Size:
  10
• Stator Input Voltage Rating In Volts:
  5.0
• Stator Input Current Rating:
  2.8 milliamperes
• Stator Input Electrical Power Rating:
  3.6 milliwatts
• Frequency In Hertz:
  400.0
• Zso Resistance In Ohms:
  457.00
• Rotor Dc Resistance In Ohms:
  364.00
• Stator Dc Resistance In Ohms:
  304.00
• Phase Shift Angle In Deg:
  10.000 input to output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  40.00
• Electrical Error Angular Range In Minutes:
  -30.0/+30.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  30.00 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  10.00 centimeter-grams
• Alignment Hole Quantity:
  3
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0008 inches
• Shaft End Play:
  Between 0.0001 inches and 0.0005 inches
• Terminal Designator And Schematic Position:
  Connection r1 position a and connection r2 position b and connection r3 position c and connection s1 position h and connection s2 position e and connection s3 position j and connection s4 position f
• Pilot Length:
  0.0380 inches
• Shoulder Length:
  0.0625 inches
• Mounting Surface To Terminal End Distance:
  1.2410 inches
• Shaft Maximum Runout:
  0.0010 inches
• Terminal Location:
  Rear
• Shaft Slot Depth:
  0.0934 inches single shaft
• Plus J Zso Reactance In Ohms:
  1727.00
• Shaft Slot Width:
  0.0200 inches single shaft
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Depth:
  0.0781 inches
• Transformation Ratio:
  0.767 stator to rotor
• Alignment Hole Bolt Circle Diameter:
  Between 0.6750 inches and 0.6810 inches
• Shaft Radial Play Determining Weight:
  1.4 ounces
• Shaft End Play Determining Weight:
  3.0 ounces
• Terminal Type And Quantity:
  7 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-007-7833