Electrical Resolver

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round a
• Pilot Diameter:
  0.5000 inches
• Flange Diameter:
  0.7500 inches
• Flange Thickness:
  0.0620 inches
• Undercut Diameter:
  0.6910 inches
• Undercut Width:
  0.0620 inches
• Shaft Diameter:
  0.1200 inches single shaft
• Shaft Length:
  0.3350 inches single shaft
• Fragility Factor:
  Moderately rugged
• Body Size:
  8
• Stator Input Voltage Rating In Volts:
  10.0
• Frequency In Hertz:
  400.0
• Zso Resistance In Ohms:
  615.00
• Zrs Resistance In Ohms:
  995.00
• Transformation Ratio Equality In Percent:
  0.001
• Compensation Method:
  Resistor compensated and winding compensated
• Compensator Dc Resistance In Ohms:
  200000.00
• Compensator Transformation Ratio In Percent:
  2.002 rotor to compensator
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  20.00 input
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  24.00
• Interaxis Error Angular Range In Minutes:
  -5.0/+5.0
• Output Voltage Functional Error Range In Percent:
  -0.1/+0.1
• Actuator Friction Torque At Minus 55 Deg Celsius:
  9.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  5.0 centimeter-grams
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0008 inches
• Shaft End Play:
  Between 0.0005 inches and 0.0015 inches
• Terminal Designator And Schematic Position:
  Connection r1 position a and connection r2 position c and connection r3 position b and connection s1 position h and connection s2 position e and connection s3 position g and connection s4 position f and connection c1 position m and connection c2 position j and connection c3 position l and connection c4 position k
• Pilot Length:
  0.0400 inches
• Mounting Surface To Terminal End Distance:
  1.2400 inches
• Shaft Maximum Runout:
  0.0010 inches
• Terminal Location:
  Rear
• Shaft Slot Depth:
  0.0300 inches single shaft
• Plus J Zso Reactance In Ohms:
  1930.00
• Shaft Slot Width:
  0.0250 inches single shaft
• Plus J Zrs Reactance In Ohms:
  350.00
• Shaft Type:
  Round, slotted, undercut single shaft
• Transformation Ratio:
  0.980 rotor to stator
• Shaft Tip Length:
  0.0850 inches single shaft
• Shaft Undercut Diameter:
  0.1040 inches single shaft
• Shaft Radial Play Determining Weight:
  4.0 ounces
• Shaft End Play Determining Weight:
  8.0 ounces
• Terminal Type And Quantity:
  9 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-01-110-3644