Electrical Resolver

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  Between 1.0570 inches and 1.0650 inches
• Flange Thickness:
  Between 0.0900 inches and 0.0960 inches
• Undercut Diameter:
  Between 0.9700 inches and 0.9800 inches
• Undercut Width:
  Between 0.0450 inches and 0.0550 inches
• Shaft Diameter:
  0.1195 inches single shaft and 0.1200 inches single shaft
• Shaft Length:
  0.6540 inches single shaft and 0.6780 inches single shaft
• Body Size:
  11
• Stator Input Voltage Rating In Volts:
  10.0
• Stator Input Current Rating:
  4.0 milliamperes
• Stator Input Electrical Power Rating:
  10.0 milliwatts
• Frequency In Hertz:
  400.0
• Zso Resistance In Ohms:
  380.00
• Zrs Resistance In Ohms:
  610.00
• Rotor Dc Resistance In Ohms:
  330.00
• Stator Dc Resistance In Ohms:
  305.00
• Compensation Method:
  Winding compensated
• Compensator Dc Resistance In Ohms:
  350.00
• Compensator Transformation Ratio In Percent:
  0.990 rotor to compensator
• Phase Shift Angle In Deg:
  9.000 output to input
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  10.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  10.00
• Output Voltage Functional Error Range In Percent:
  -0.1/+0.1
• Actuator Friction Torque At Minus 55 Deg Celsius:
  16.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  4.0 centimeter-grams
• Alignment Hole Quantity:
  4
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0005 inches
• Shaft End Play:
  Between 0.0005 inches and 0.0015 inches
• Pilot Length:
  0.0590 mils and 0.0650 centimeters
• Shoulder Length:
  0.0590 mils and 0.0650 centimeters
• Mounting Surface To Terminal End Distance:
  2.0650 inches
• Shaft Maximum Runout:
  0.0010 inches
• Terminal Location:
  Side
• Plus J Zso Reactance In Ohms:
  2200.00
• Plus J Zrs Reactance In Ohms:
  250.00
• Shaft Type:
  Round single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.980 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  Between 0.8090 inches and 0.8150 inches
• Shaft Radial Play Determining Weight:
  4.0 ounces
• Shaft End Play Determining Weight:
  16.0 ounces
• Terminal Type And Quantity:
  8 wire lead
• Specification Data:
  19200-11743669 manufacturers specification control
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-01-021-7303